Description
The IPI 450 model is the largest of the IPI range and covers a range of flow-rates from 1749 to 9257 l/h.
Some applications
- Transfer and dosage of inks, glues, varnishes, latex suspensions, etc …
- Water treatment (sampling, pH adjustment, water handling, etc …)
- Bakery and pastry (dosage of additives and flavourings, dosage of brine and eggs, dosage of water with yeast, etc …)
- Handling of abrasive and corrosive fluids (ferric hloride, copper sulfate, etc …)
- Dosing of additives for beer, wine, beverages, dairy and food products in general.
Features
- Pumping head in aluminum offers a great mechanical resistance and the maximum degree of chemical resistance to aggressive agents in case of tube rupture. The anodic oxidation further enhances the chemical resistance.
- Pumping head components as terminal clamps, disk, pin roll holders, fasteners, hardware and hose connection tube are made of aluminium Anticorodal anodise or in STAINLESS STEEL SS 304 / 316 for the maximum chemical and mechanical resistance.
- PET or PTFE polymer rollers, self-lubricating and high mechanical strength.
- Pin roll holders of special design “cantilevered” for maximum ease of maintenance and adaptability to C.I.P. / S.I.P. systems.
- Mechanical worm gear motor from a leading brand, coupled with a three-phase motor 230/400 Volt – 50 Hz. – IP55 – 1400 rpm – blue colour.
- Rubber hose Teknoprene TPV natural (FDA) of our production.
- Transparent plate in PMMA shockproof or PC.
- Flow-rates from 1749 to 9257 l/h with tubing ID 45 x OD 70 mm
- Max Presure: 4 bars
