Description
This simple and economical design provides a furnace which can be used without the need to purchase an accessory work tube.However, should vacuum or a modified atmosphere be required, it is necessary to use a separate slide-in work tube in order to provide the required length needed to fit end seals. Similarly, in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required.
- 1000°C or 1200°C maximum operating temperature
- 15 mm, 25 mm or 38 mm inner diameters
- 130 mm, 250 mm, 400 mm or 850 mm heated length
- Integral wirewound work tube
- Carbolite Gero 301 controller, with single ramp to set-point & process timer
- Delayed start / process timer function as standard
- Horizontal configuration mounted on control module
Options
- Over-temperature protection (recommended to protect valuable contents & for unattended operation)
- A range of additional work tubes is available in a variety of materials
- Insulation plugs & radiation shields to prevent heat loss & improve uniformity
- Modified atmosphere and vacuum assemblies are available
- Alternative mounting options are available
- A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
| MTF10/15/130 | MTF10/25/130 | |
| Max. continuous operating temperature (°C) | 900 | 900 |
| Tube diameter (mm) | 15 | 25 |
| Ext. dimension (mm) | 360x200x240 | 360x200x240 |
| Max Power (KW) | 0.4 | 0.4 |
| Weight (kg) | 3 | 3 |
