Peristaltic pump Megaflow

Peristaltic pump for flowrate from to 60 000 mL/h.

Categories: ,

Description

Description of the Megaflow peristaltic pump

  • digital set point can be adjusted over three powers of magnitude
  • remote controls
  • greatly extended tubing life and quite no pulsation
  • plug-in power supply for increased safety
  • very economical in use while using low-cost tubing without stoppers

Interesting construction features of the peristaltic pump

  • Instead of small rollers, which are used by most pump producers, the pump has bearings of a larger diameter with glass beads. This reduces pulsations, friction and mechanical strain on the tubing leading to better pump performance.
  • The bearings glide over the tubing so gently, that unlike other pumps, it is unnecessary to prevent movement of the tubing by a special fixation. In this manner the lifetime of the tubing is considerably increased.
  • The pressure on the tubing is delivered individually through an off-center lever and spring made of stainless steel. This assures that a minimal pressure is applied to the tubing which still guarantees good functioning of the pump without unnecessary deformation of the tubing.
  • The spring also reduces the liquid pressure to approx. 1 bar. This is useful when for any reason the line is blocked.
  • The asymmetric pump head reduces pulsation.
  • A high-quality stepping motor together with integrated microprocessor electronics assure a high precision of flow rate with no inertia while turning the pump on and off.
  • The pump head is made from hard, chemically stable epoxide.
  • The pump dimensions have been minimized. Therefore, the Megaflow pump is considerably smaller than other products of similar performance. The pump is easy to use and saves space in the laboratory.
  • Remote control and the possibility of flow integration with the INTEGRATOR option increases the scope of use of the pump in automatically controlled systems (eg. fermentation, chemical synthesis, fraction collection, etc.)
  • high quality/price ratio, low use-costs, easy handling

Remote control for the peristaltic pump

Remote control of the speed by external voltage 0-10 V (0-20 or 4-20 mA); ON/OFF control by external contact or 3-12 V voltage; compatible with other LAMBDA instruments (Minifor fermentor and Omnicoll fraction collector); RS 485 as option. It can be connected to a controller, for example for pH control with an acid, or to a computer with the programs Siam or PNet.

Specifications of the Megaflow peristaltic pump

The well-proved mechanics of PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps can be easy programmed allowing a creation of any flow rate profile. By programming zero flow rates the pump can be switched on and off without using a timer

Flow rate from 0 to 60 000 ml/hr using tubing with internal diameter 1 to 8 mm, wall thickness ca. 2 mm
Programming 99 steps
Power source 12 V DC using plug-in power supply 230 V / AC 50 – 60 Hz, consumption approx. 60 W, or battery
Weight 2.5 kg
Safety class CE, satisfies IEC Norm 1010/1
Dimensions 18 (W) × 13 (H) × 16 (D) cm
Guarantee 2 years