Description
The EX9133C-2-MTCP is one of gate way for easy convert the Modbus TCP to Modbus RTU/ Modbus ASCII(Slave) or Modbus RTU/ Modbus ASCII to Modbus TCP(Slave) .
EX-9133C-2-MTCP converter device can be configured as network server or network client. In the client mode, it can be installed in network which is protected by NAT router or firewall without a real IP address.
It is low cost and high performance for building automation, home automation,smart energy, internet remote access, remote gateway for SCADA & OPC.
- CPU 32-bit ARM-Cortex-M4 CPU, 120MHz( Max)
- RAM 128 K Bytes SRAM
- ROM 512 K Bytes Flash ROM
- Ethernet Port type RJ-45 Connector
- Speed 10 /100 M bps ( Auto Detecting)
- Mode :TCP Client/ Server
- Setup HTTP Browser Setup (IE & Netscape)
- Security Setup Password
- Protection Built-in 1.5KV Magnetic Isolation
- Serial Port :2 RS-232 ( 1 x DB9), 1 RS-422/485 ( Auto Detect ; T.B.)
- Speed 300 bps~115.2 K bps
- Parity None , Odd , Even , Mark , Space
- Data Bit 5, 6, 7, 8
- Stop Bit 1, 2
- Port-1 RS-232 Pins: Rx , Tx , GND , RTS , CTS , DTR , DSR , DCD
- Port-2 RS-422 Rx+ , Rx- , Tx+ , Tx- (Surge Protect)
- RS-485 Data+ , Data- (Surge Protect)
- Built –in RS-422/RS-485 pull high Resistor
- 15KV ESD for all signals
- IP Search Utility Support Win 10, Win-7, Vista, Win-XP, Win-2003 server, Win-2000
- Power DC 9- 24V, 500mA, DC Jack
