Description
Indoor air quality has a huge influence on people’s health and well-being. Stale indoor air can lead to tiredness, loss of concentration and discomfort. Reliable monitoring of indoor air quality with the WiFi data logger testo 160 IAQ. The data logger can for example be used in schools, nursery schools, conference rooms, open-plan offices, auditoriums or museums – in short: in rooms where a lot of people gather.
The easy-to-use WiFi data logger testo 160 IAQ is ideal for monitoring indoor air quality. Thanks to its sensors for temperature, humidity, CO2 and atmospheric pressure, it accurately determines the ambient conditions in each room.
Particularly user friendly: Coloured LEDs on the data logger indicate the air quality using the traffic light principle. The CO2 limit values can be determined individually. The LEDs are switched off in battery mode in order to ensure longer battery lives.
The following values can be read off the logger display:
With mains operation: CO2 concentration and alternately temperature and humidity. The atmospheric pressure values are not shown on the logger display, however they are available in the Cloud
In battery mode: CO2 concentration and temperature. The data for humidity are not displayed – because that ensures longer battery lives
All measurement data are stored by the data logger directly in the Testo Cloud via your WLAN. This means you can also document and analyze your measurement data over a longer period of time.
If limit values are exceeded, you will be notified immediately by e-mail or (optionally) SMS thanks to the alarm function. You can access all measuring values and analysis functions any time and anywhere with your internet-capable smartphone, tablet or PC.
Humidity – Capacitive
- Measuring range: 0 to 100 %RH (non-condensing)
- Accuracy: ±2.0 %RH at +25.0 and 20 to 80 %RH, ±3.0 %RH at +25.0 and < 20 and > 80 %RH; ±1.0 %RH hysteresis
- ±1.0 %RH / year drift
- Resolution: 0.1 %RH
Absolute Pressure
- Measuring range: 600 to 1100 mbar
- Accuracy: ±3 mbar at +22 °C
- Resolution: 1 mbar
Ambient CO2
- Measuring range: 0 to 5000 ppm
- Accuracy: ±(50 ppm + 3 % of mv) at 25 °C
- Without external power supply: ±(100 ppm + 3 % of mv) at 25 °C
- Resolution: 1 ppm
Temperature
- Measuring range: 0 to +50 °C
- Accuracy: ±0.5 °C
- Resolution: 0.1 °C
Dimensions: 117 x 82 x 32 mm (LxWxH)
Operating temperature: 0 to +50 °C
Protection class: IP20
Communication rate/ measurement rate: Dependent on Cloud licence; Basic: 15 min … 24 h / Advanced: 1 min … 24 h
WLAN Connectivity: supported wireless LAN standards: IEEE 802.11 b/g/n and IEEE 802.1X; Possible encryption methods: WPA2 Enterprise: EAP-TLS, EAP-TTLS-TLS, EAP-TTLS-MSCHAPv2, EAP-TTLS-PSK, EAP-PEAP0-TLS, EAP-PEAP0-MSCHAPv2, EAP-PEAP0-PSK, EAP-PEAP1-TLS, EAP-PEAP1-MSCHAPv2, EAP-PEAP1-PSK, WPA Personal, WPA2 (AES), WPA (TKIP), WEP
Alarm function: LED (traffic light function: red, yellow, green)
Battery life: 1 year
Display type: LCD (Liquid Crystal Display)
Power supply: 4 x AA batteries 1.5 V, alternatively mains unit via USB connection
Interface: USB
Radio range: 100 m
Memory: 32,000 Measuring values / Sum of all channels
Weight: 269 g
Dimension display: 55 x 42 mm
Delivery Scope
- WiFi data logger testo 160 IAQ
- Including free Cloud access (Basic functionality)
- USB mains unit
- USB interface cable
- Wall bracket, including tool and adhesive strip
- QR code sticker
- Calibration protocol
- Short instructions
