Water hardness monitor Bamosoft Control BAMO
Description
- Fit any water softener system
- Controller and survey monitoring
- Reagent free
- Calcium and magnesium selective electrode
- Alarm: Adjustable signal between 0.25% and 10% of raw water hardness
- 4-20 mA signal output on set up ranges
- Continuous system self-diagnostic
- Ambient temperature: 5 to 50°C
- % R. H.: 20 to 80 %
- Power supply: 100 to 240 V 50/60 Hz – 0.2 A, included separated unit
- Power consumption: 15 V DC; approx. 6 Watt
- Relay outputs: 2 SPDT, switching power 24 V DC / 1 A
- Water connections: for PA tube o.d. 4 mm, i.d. 2 mm
- Recommended up stream dirt filters = 0.1 mm
- Pressure limits: 1 to 10 bar
- Pressure limits: Raw and softened water, 1 to 10 bar
- Drain sample: Ø 6 mm as a minimum, pressure free
- Water quality: Raw water, free of grease, oil and brine
- Measuring range: 0.3 to 28°e (or 1 to 100°f)
- Threshold, pre-set: 8 steps, in percents (0.25, 0.5, 1, 2, 4, 6, 8 and 10%) of water hardness reference value
- Output signal: 4-20 mA (max. 250 Ohm)
- Electrode check up: Self diagnostic with alarm for low efficiency
- External cycle switch: Pulse limit, > 0.5 s as a minimum
- Electrode time life: 6 to 12 months
- Water parameters: Cl2<0.5 ppm & 5 <pH< 9 & 5 <T< 30°C, Fe < 0.05 mg/L, Mn < 0.05 mg/L
