Description
The logger can transfer the data directly on a monitoring computer by radio frequencies (monitoring mode) or can store the data in its memory (recording mode). The parameters are temperature, humidity, acceleration, shock, light
Specification of the data loggers
- temperature range: -40 to +60°C +/- 0.3°C at 25°C
- humidity range: 0 to 100 % RH ± 2% (de 20 at 80% RH)
- light: 0 to 220 Lux +/- 30 Lux
- acceleration: 3 axiss, – 16 g to +16 g +/- 0.5 g, resolution: 14 bits – 3.9 mg, bandwidth: 1600 Hz
- Free-fall height: 1 cm to 20 m +/- 5 cm
- sample interval: 1 second to 4 hours
- memory capacity: approximately 100,000 time-stamped measurements (flash memory technology) corresponding to 1 measurement reading every 10 minutes for 6 months with 6,000 events (shock, temperature, humidity, etc.)
- min/max value
- battery life: 2 years (for 1 measurement/10 minutes)
- IP54
- dimension: 110 x 56 x 27 mm
- weight 160 g
- RF range: 100 m to 1 km (there are different antenna sizes)
- frequency: ISM 868 MHz (Europe); 915 MHz (USA)
- possibility to start the recording with a magnet
Applications of the dataloggers
- storage control
- transport of fresh, frozen food, pharmaceuticals…
| Ref. | temperature range (°C) | RH range(%) | box | max. signal range(m) | |
| TRK31 | -40 to +60°C +/- 0.4°C | not available | not available | 100 | |
| TRK33 | -40°C to +60°C +/- 0.4°C | 0 to 100 % +/- 2 % | not available | 100 | |
| TRK41 | -40 to +60°C +/- 0.4°C | 0 to 100 % +/- 2 % | 0 to 220 Lux ± 30 Lux | 100 |
