Description
This small gear pump is ideal for products such as silicones, glues, elastomers, polyurethanes, various resins, various hardeners, pigments, polyesters, epoxy, etc…
Advantages
All parts are made of hardened stainless steel. Dead zones are minimized
Maximum reduction of dead zones allowing better rinsing of the pump
Very quickly interchangeable seal
Robust drive shaft, treated and maintained by 2 bearings and an axial thrust bearing
Centering pins for easy pump mounting and increased accuracy
Technical characteristics
- Sealing: Lip seals and liquid barrier sealing (16KA
- Rotation speed: From 10 min-1 up to 200 min-1, depending on the product
- Flow range: From 0.0005 l/min to 0.6 l/min (depending on displacement)
- Standard direction of rotation: Clockwise rotation (A)
- Admitted pressure at the outlet: Max. 100 bar
- Inlet and outlet ports: 2x Ø 6mm on the pump cover. Supplied with G1/4” connection block (0.05 cc/rev + 0.1 cc/rev: G1/8”)
- Drive shaft diameter: Ø 12mm with 4mm key
- Control shaft height: H=40mm
- Fixing center distance: L=55mm
