Fermenter Bioengineering P300

In situ sterilizable Bioengineering Fermenter with 300 L tank

Categories: ,

Description

Designation: No. W-5406 Bioengineering (Year of construction: 1991)

Features

  • Microbial reactor: Rushton propeller, ring sparger, double jacket heating with superheated water-
  • Primary heat transfer medium: gray steam for double jacket
  • Material: 316L interior Ra<0.8mm
  • Drive: Motor with pulley
  • Sampling: push valve + valve for draining and transfer
  • Easily moved with a pallet truck / footprint 1.1×1.13m Height = 2m to the plate
  • Mechanical seal: with glycerol tank
  • Volume = 300L
  • Double jacket volume = 22L
  • Maximum pressure in the reactor = 2.5bar (overpressure disc safety)
  • Maximum double jacket pressure = 4 bar
  • Maximum temperature in the reactor = 150°C
  • Maximum temperature in the double jacket = 150°C
  • Sterilization time: approx. 1h15
  • Recirculation pump for superheated water in a double jacket = Grundfos pump: Type: UMC 50-30 (model D), 380-400V (3 phases), Power: 50 (I) – 235 (III) W (i.e 0.1 – 0.72A), max T: 120°C, short period: 140°C, IP 42.

Controls(control cabinet)

  • Agitation: 0-750 RPM with 2 Rushton turbines ø 20cm (6 blades)
  • Temperature: sterilizable in situ (20min at 121°C), Max pressure 2.5bar
  • Air: rotameter with ceramic filter sterilizable in situ with the medium, outlet filter directly on the plate with ball valve
  • pH: available if necessary: ​​pH measurement and/or control (with dosing pumps), pH cable and probe
  • pO2: dissolved oxygen regulator available with DO cable and probe if necessary

Base price = 12 000 Euros (excluding taxes and transport) to be discussed and variable according to the desired controllers

Transport and removal = to be organized by buyer

Equipment sold without warranty