Description
The EX9250-MTP is a high-density I/O module built-in two ports(RJ-45) 10/100 based-T interface for seamless Ethernet connectivity. It provides 10 Isolated digital input (Dry/Wet Contact) and 6 digital output channels with 3750VRMS Isolating protection. All of the Digital Input channels support input latch function for important signal handling. Mean while, these DI channels allow to be used as 300Hz counter. Opposite to the intelligent DI functions, the Digital Output channels also support pulse output function.
Daisy chain connectivity offers flexible cabling and space saving capabilities. With Ethernet auto-bypass function supported, it prevents accidental power failure if one of the module’s unexpectedly shuts down.
Features
- 2-ports(RJ-45) Ethernet 10/100 Based-T Comm.
- Daisy chain connection with auto-bypass protection
- Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP
- Support Automatic DIO Sync.(peer-to-peer).
- DO Auto-Off Time Mode.
- Support 6 Isolated digital output channels (NPN).
- Support 10 Isolated digital Input Channels(Dry/Wet)
- Fully Photo-Isolation 3750Vrms
- Protocol: ASCII Format & Modbus TCP
Specification
- 10 digital inputs, single ended (Wet/Dry contact), DI0 to DI9
- Input Level: Logic level status can be inversed via ASCII/Modbus command.
- Dry Contact : Logic level 0 (active) : Close to GND, Logic level 1 (inactive) : Open
- Wet Contact : Logic level 1 (active) : +5V to +30VDC max, Logic level 0 (inactive) : +2VDC max
- Input Impedance: 2K ohm(Wet Contact)
- Counter input: 300Hz counter input (32-bit + 1-bit overflow)
- Optical Isolation Voltage: 3750Vrms
- 6 digital outputs, isolated Open collector (NPN), DO0 to DO5
- Output logical level: Logic level status can be inversed via ASCII and
- Modbus TCP command.
- Open Collector to +5 ~ 30V / 500 mA max load.
- Each channel supports 300Hz pulse output
- Optical Isolation Voltage: 3750Vrms
