Description
Coating thickness gauge TP-2020 is designed for thickness measuring of coatings based on ferrous and non-ferrous metals. Variety of various sensors make it possible of non-destructive testing of protective coatings with a wide thicknesses range. Thickness gauge can also measure next parameters: the depth of grooves and corrosion, surface roughness as well as temperature control, ambient humidity and dew point temperature, therefore covering a wide range of tasks by one universal unit (thickness gauge).
To suit specific control requirements depending on the thickness, base and coating to be measured, there are various types of probes. Coating Thickness Gauge TP-2020 has a wide range of measured coatings (from 0 up to 60 mm), therefor are able to make protective coatings revision starting with films, body paint thickness to coatings of metal constructing, bridges, oil and gas pipelines and other objects with bitumned coatings.
Coating thickness gauge features
| Thickness measurement range(depends on probe type) | 0 µm … 60 mm |
| Measured parameter | coating thickness, corrosion depth, roughness, temperature, humidity, dew point temperature |
| Measuring units | μm, mm, inch, mil |
| Revision modes | calculation of average, indication of minimum and maximum |
| PC connection | yes |
| Menu languages | English, Spanish, French, Russian |
| Dimensions, mm | 122x60x25 |
| Operating temperature range, ° C | -20 … +40 ° C |
| Batteries | 2 AA |
| Type of connectors of probes | Lemo |
| Storage of measurement results and PC software (optional) | 256 |
| Standards | AS 2331.1.4, AS 3894.3-B, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ASTM G 12, BS 5599, EN 13523-1, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 19840, ISO 2063, ISO 2178, ISO 2360, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, NF T30-124, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32, ASTM D 1186-B, ASTM D 1400, BS 3900-C5-6B, BS 3900-C5-6A, BS 5411-11, BS 5411-3, DIN 50981, DIN 50984, ECCA T1, ISO 2808-6A, ISO 2808-6B, SS 184159 |
| Time of continuous work hours, not less | 20 |
| Weight of electronic unit with batteries, no more, kg | 0.2 |
Specifications of probes for Coating Thickness Gauge NOVOTEST TP-2020
| Coatings on steel (dielectric and conductive coatings on ferromagnetic metals and alloys) |
||||
| Type of probe | Coating thickness measurement range | Measurement accuracy | Dimensions of the probe, mm | Purpose |
| probe F-0,3 | 0-300 μm | ±(0,03h+0,001) mm | Ø5×40 | Measurement of paint, varnish and galvanic coatings |
| probe F-0,5 | 0-500 μm | ±(0,03h+0,001) mm | Ø 8×15 | |
| probe F-2 | 0-2000 μm | ±(0,03h+0,002) mm | Ø 10×35 | Measurement of paint and varnish coatings |
| probe F-5 | 0-5000 μm | ±(0,03h+0,002) mm | Ø 18×40 | Measurement of paint, varnish and mastic coatings |
| Coating on the non-magnetic metals (Any (dielectric or metal) coatings on non-ferrous metals and alloys) |
||||
| probe NF-2 | 0-2000 μm | ±(0,03h+0,002) mm | Ø 12×35 | Measurement of anodic-oxide films and paint coatings |
| Thick coatings on metals (dielectric coatings on metals) | ||||
| probe M-12 | 0-12 mm | ±(0,03h+0,02) mm | Ø 15×50 | Measurement of mastic coatings |
| probe M-30 | 0-30 mm | ±(0,03h+0,03) mm | Ø 40×50 | |
| probe M-60 | 0-60 mm | ±(0,03h+0,05) mm | Ø 70×60 | |
| Measurement of surface roughness, Rz (After abrasive blasting pre-painting work) |
||||
| probe DSH | 2-300 μm | ±(0,03h+0,002) mm | Ø 18×40 | Measurement of surface roughness after sand and shot blasting |
| Temperature, humidity and dew point | ||||
| probe DT | -50 … +80 ° C | + / – 1 ° C | Ø 12×107 | Temperature measurement |
| probe DTVR | Humidity: 0 – 100% Temperature: -50 … 80 °C Dew point: -15 – +40 °C |
± 5% ± 1 ° C ± 2 ° C |
Ø 50×120 | Measurement of temperature, humidity and |
