Sysmatec

Peristaltic pump

peristaltic pump

Preciflow

The development of these peristaltic pumps was based on long time experience of laboratory.They have been continuesly improved. The result is a practical, precise and reliable laboratory pump which is one of the most compact in its class. The for pumps cover a flow rate range from 0.01 ml/h to 10000 ml/h.

Description

  • digital set point can be adjusted over three powers of magnitude
  • remote controls
  • greatly extended tubing life and quite no pulsation
  • plug-in power supply for increased safety
  • very economic in use while using low cost tubing without stoppers

Interesting construction features

  • Instead of small rollers, which are used by most pump producers, the pump has bearings of a larger diameter with glass beads. This reduces pulsations, friction and mechanical strain on the tubing leading to better pump performance.
  • The bearings glide over the tubing so gently, that unlike other pumps, it is unnecessary to prevent movement of the tubing by a special fixation. In this manner the life time of the tubing is considerably increased.
  • The pressure on the tubing is delivered individually through an off-center lever and spring made of stainless steel. This assures that a minimal pressure is applied to the tubing which still guarantees good functioning of the pump without unnecessary deformation of the tubing.
  • The spring also reduces the liquid pressure to approx. 1 bar. This is useful when for any reason the line is blocked.
  • The asymmetric pump head reduces pulsation.
  • A high quality stepping motor together with integrated microprocessor electronics assure a high precision of flow rate with no inertia while turning the pump on and off.
  • The pump head is made from hard, chemically stable epoxide.
  • The pump dimensions have been minimized. Therefore the PRECIFLOW pump is considerably smaller than other products of similar performance. The pump is easy to use and saves space in the laboratory.
  • Remote control and the possibility of flow integration with the INTEGRATOR increases the scope of use of the pump in automatically controlled systems (eg. fermentation, chemical synthesis, fraction collection, etc.)
  • high quality/price ratio, low use-costs, easy handling

Remote control

Remote control of the speed by external voltage 0-10 V (0-20 or 4-20 mA); ON/OFF control by external contact or 3-12 V voltage; compatible with other LAMBDA instruments (Pump-flow integrator and Omnicoll fraction collector); RS 485 as option. It can be connected to a controller, for example for pH control with an acid, or to a computer with the programs Siam or PNet.

Specifications of the Preciflow Peristaltic Pump

Flow rate from 0.01 to 600 ml/hr using tubing with internal diameter 0.5 to 4 mm, wall thickness ca. 1 mm
Power source 12 V DC using plug-in power supply 230 V / AC 50 - 60 Hz, consumption approx. 5 W, or battery
Weight 1.2 kg
Safety class CE, satisfies IEC Norm 1010/1
Dimensions 10.5 (W) × 9.5 (H) × 10.5 (D) cm
Garantee

2 years


Multiflow

Specifications of the Multiflow Peristaltic Pump

The well-proved mechanics of PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps can be easy programmed allowing a creation of any flow rate profile. By programming zero flow rates the pump can be switched on and off without using a timer

Flow rate from 0.01 to 600 ml/hr using tubing with internal diameter 0.5 to 4 mm, wall thickness ca. 1 mm
Programming 99 steps
Power source 12 V DC using plug-in power supply 230 V / AC 50 - 60 Hz, consumption approx. 5 W, or battery
Weight 1.2 kg
Safety class CE, satisfies IEC Norm 1010/1
Dimensions 10.5 (W) × 9.5 (H) × 10.5 (D) cm
Garantee

2 years


Hiflow

Specifications of the Hiflow Peristaltic Pump

The well-proved mechanics of PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps can be easy programmed allowing a creation of any flow rate profile. By programming zero flow rates the pump can be switched on and off without using a timer

Flow rate from 0.05 to 3000 ml/hr using tubing with internal diameter 0.5 to 4 mm, wall thickness ca. 1 mm
Programming 99 steps
Power source 12 V DC using plug-in power supply 230 V / AC 50 - 60 Hz, consumption approx. 30 W, or battery
Weight 1.5 kg
Safety class CE, satisfies IEC Norm 1010/1
Dimensions 10.5 (W) × 9.5 (H) × 10.5 (D) cm
Garantee

2 years


Maxiflow

Specifications of the Maxiflow Peristaltic Pump

The well-proved mechanics of PRECIFLOW peristaltic pump has been extended for a flow rate programming. Up to 99 steps can be easy programmed allowing a creation of any flow rate profile. By programming zero flow rates the pump can be switched on and off without using a timer

Flow rate from 0.1 to 10000 ml/hr using tubing with internal diameter 0.5 to 4 mm, wall thickness ca. 1 mm
Programming 99 steps
Power source 12 V DC using plug-in power supply 230 V / AC 50 - 60 Hz, consumption approx. 60 W, or battery
Weight 1.26 kg
Safety class CE, satisfies IEC Norm 1010/1
Dimensions 10.5 (W) × 9.5 (H) × 10.5 (D) cm
Garantee

2 years


Multichannel peristaltic pump iPump2L+DG

  • 4 to 6 channels
  • Flow rate:0.00001-75.12mL/min, depending on the tube diameter
  • Applicable pump heads:DG-4, DG-6, DG8, DG 12
  • Flow rate and speed display
  • Flow rate calibration function, Flow accuracy±0.5%
  • 3 mode: speed, flow rate, time
  • Speed adjustable (clockwise and counterclockwise direction)
  • MAX speed key, prompt tube filling and emptying or for easy cleaning
  • Foot switch for choice for more convenient operation.
  • Stepper motor drive,128 times segmentation
  • Power down memory function, storing the running parameters automatically,safe and reliable.
  • Tube wall thickness: 0.8-1 mm
  • Max tube outer diameter: 3.17 mm
  • Speed range 0.01 to 200 RPM
  • Speed resolution 0.01 to 1 RPM
  • RS485 communication interface (Generic Modbus statute)
  • Optionnal 0-5 V, 0-10 V, 4-20 mA inputs
  • Power consumption <35W
  • Power supply AC 176-264V, 50Hz/60Hz
  • Drive Dimension (L×W×H): 292 mm×208mm×180 mm (not including the pump head)
  • Weight: 4 kg
  • IP31
Model Rollers Channel Flow rate (ml/min) depending on tube size
iPump2S+DG-4A 6 4 0.00016-75.12
iPump2S+DG-4B 10 4 0.0001-54.65
iPump2S+DG-6A 6 6 0.00016-75.12
iPump2S+DG-6B 10 6 0.0001-54.65


Multichannel peristaltic pump iPump6-W

  • Unique Time function,preset time,more convenient.
  • Speed adjustable (clockwise and counterclockwise direction)
  • 3 mode: speed, flow rate, time (automatic stop as preset time, time range 1second-99 hours)
  • Prompt tube filling and emptying
  • Power-down memory function
  • Brush less dc motor drive, free maintenance, higher reliability
  • Super large torque, maximum cascade 8 YZ series pump head
  • Speed range 40-600RPM
  • Speed resolution 1RPM
  • RS485 communication interface (Generic Modbus statute)
  • Optionnal 0-5 V, 0-10 V, 4-20 mA inputs
  • Power consumption <200W
  • Power supply AC 176-264V, 50Hz/60Hz
  • Drive Dimension (L×W×H): 292mm×208mm×180mm (not including the pump head)
  • Weight: 6 kg
  • IP31
Model Rollers Channel Flow rate (ml/min) depending on tube size
iPump6S-W 4xYZ15A,YZ15B 3 4 3.12 to 2416
iPump6S-W 4xYZ25A,YZ25B 3 4 69.45 to 1856
iPump6S-W 6xYZ15A,YZ15B 3 6 3.12 to 2416
iPump6S-W 6xYZ25A,YZ25B 3 6 69.45 to 1856
iPump6S-W 8xYZ25A,YZ25B 3 8 3.12 to 2416
iPump6S-W 8xYZ25A,YZ25B 3 8 69.45 to 1856


Contact

Top

Sysmatec
Oberdorfstrasse 51
CH 3930 Eyholz
tel + 41 27 946 80 18
fax + 41 27 946 86 42
info@sysmatec.ch