PP-Syringe

The syringe pump Vitfit can use quite all the syringe on the market. Some of them are presented here with Luer-Lock connector.

• volume 2 ml, graduation 0.1 ml (Réf. C540.1)
• volume 5 ml, graduation 0.2 ml (Réf. C541.1)
• volume 10 ml, graduation 0.5 ml (Réf. C542.1)
• volume 20 ml, graduation 1 ml (Réf. T550.1)
• volume 30 ml, graduation 1 ml (Réf. T551.1)
• volume 50 ml, graduation 1 ml (Réf. T552.1)

Glass-Syringe series LLC

borosilicate glass, with Luer Lock connector, can be autoclaved at 200 °C

• volume 1 ml, (Ref. LLC1CC)
• volume 2 ml, (Ref. LLC2CC)
• volume 5 ml, (Ref. LLC5CC)
• volume 10 ml, (Ref. LLC10CC)
• volume 20 ml, (Ref. LLC20CC)
• volume 30 ml, (Ref. LLC30CC)
• volume 50 ml, (Ref. LLC50CC)
• volume 100 ml, (Ref. LLC100CC)
• volume 150 ml, (Ref. LLC150CC)
• volume 200 ml, (Ref. LLC200CC)
• volume 250 ml, (Ref. LLC250CC)

Syringe needle

• length 25 cm, diameter 3 mm
• other length on request

Syringe H963

Made of fluoroplastic (PFA). Translucent, to transfer small quantities of aggressive liquids. For temperature from -200 °C to 250 °C.

H963-01: capacity 2,5 ml, total length 185 mm

H963-02: capacity 5,0 ml, total length 230 mm

Syringe for syringe pump

This precision syringe can be used with the syringe pump Vitfit. I has a thick wall (about 5 mm).

Glas Syringes series 1000

They are gas and liquid tight and are available in volumes from 1 ml to 2000 ml. The barrel is precision-manufactured from borosilicate glass. The plunger is made of PTFE coated aluminium and equipped with a precision PTFE seal. The flexibility of the seal allows the interchange of glass barrel and plunger between syringes of the same capacity. All parts in contact with the samples are made of inert materials such as glass and PTFE. These syringes have an accuracy of ± 1% of the nominal volume. They are equiped with flange (for better fixation on the syringe pumpe for exemple) and Luer Lock.