BCP1
BCP4
DCP4
DCPST4
|
Conductivity probes
Cells with two plates of platinium with or without Pt 100.
BCP1: cell coefficient 1.5, 2 banana connectors, total length: 130 mm, diameter: 8 mm, cable 0.75m
BCP4: cell coefficient 1, 5 Pin connector, total length: 130 mm, diameter: 8 mm, cable 0.75m
DCP4: cell coefficient 1, 5 Pin connector, total length: 130 mm, diameter: 27 mm, cable 0.75m
DCPST4: cell coefficient 1, 5 Pin connector, total length: 130 mm, diameter: 27 mm, cable 0.75m, with integrated Pt100 probe
|
|
PEEK inductive conductivity probe TCL S50
It operates on the principle of inductive measurement which confers many advantages.
The measurement is reliable on products which tend to clog or with a high degree of contamination. There is a total galvanic separation between the measurement and the products.
Its PEEK construction offers excellent chemical resistance and a long life expectancy. It is also suitable for use in high temperatures up to 180 ° C.
Immersion mounting: The sensor is attached to the end of an immersion rod from 500 to 2000 mm with an optional flange mount.
Installation in pipes: the sensor is mounted in a T in DN50.
A complete measuring system consists of the following elements: an inductive conductivity sensor TCL S50 with an overmolded cable, an immersion or piping mounting system, a factory calibrated converter, a BAMOPHAR 364 type display.
- Measurement from 10 uS/cm to 2000 mS / cm
- Execution in PEEK
- Excellent chemical resistance
- Temperature: max 180 ° C
- Low fouling
- Integrated PT100 probe
|