Temperature / humidity data loggers and chart recorders

Temperature + humidity data logger EL-USB-2

• Measurement Range: 0 to +100%RH , -35 to +80°C
• Dew point indication via Windows Control Software
• USB Interface
• Memory: 16382 relative humidity and 16382 temperature
• User-Programmable Alarm Thresholds for %RH & T
• Status Indication via Red and Green LEDs
• Supplied with Replaceable Internal Lithium Battery and Windows Control Software
• Environmental Protection to IP67
• Logging rate: 10 sec. to 24 h.

Temperature + humidity data logger EL-USB-2LCD

• With display for temperature and humidity
• Measurement Range: 0 to +100%RH , -35 to +80°C
• Humidity accuracy (overall error): 3 % RH between 40 % and 100 % at 25 °C
• Humidity resolution: 0.5 %
• Temperature accuracy (overall error): 0.5 °C
• Temperature resolution: 0.5 °C
• Dew point indication via Windows Control Software
• USB Interface
• Memory: 16382 relative humidity and 16382 temperature
• User-Programmable Alarm Thresholds for %RH & T
• Status Indication via Red and Green LEDs
• Supplied with Replaceable Internal Lithium Battery and Windows Control Software
• Environmental Protection to IP67
• Logging rate: every 10 sec. to 24 h.

Temperature + Humidity Data Logger EL-21CFR-2-LCD, 21CFR-Compatible

• with LCD Screen
• Dew Point
• EasyLog 21CFR Part 11 Software available as a free download
• Assign individual users with specific permissions
• Full software & session data audit trails
• Receive email alerts for failed log in attempts
• Digital signatures added to all reports
• Add comments to specific readings
• Assign individual users with specific permissions
• Full software & session data audit trails
• Receive email alerts for failed log in attempts
• Digital signatures added to all reports
• Add comments to specific readings
• Temperature range: -35 to +80°C
• Accuracy: +/- 0.5 °C
• Logging rates between 10 seconds and 12 hours
• High contrast LCD, with two and a half digit temperature and humidity display function
• Immediate, delayed and push-to-start logging
• Memory: 16382 temperature
• Battery Life: 1 year (at 25°C and 1 minute logging rate, LCD on)

Temperature + Humidity Data logger EL-GFX2

• Temperature and Relative Humidity Data Logger with Graphic Screen
• Rugged and robust, IP67 construction
• -30 to +80°C and 0 to 100% RH measurement ranges
• Temperature resolution: 0.1 °C
• Temperature accuracy (overall error): 0.5 °C
• Humidity resolution: 0.1 %
• Humidity accuracy (overall error): 3 % RH between 40 % and 100 % at 25 °C
• Logging rates between 10 seconds and 1 hour
• Stores over 250 000 readings
• On screen menu and graphing to start, stop, review and restart the logger in the field
• Micro USB interface for PC based set-up and data download
• Immediate, delayed, push-button or temperature/RH triggered start mode
• User-programmable alarm thresholds
• Graphic LCD shows real-time readings, graph (100 last values, one channel on time) and current status
• Resettable Min/Max readings may be viewed on the LCD
• User set audible alarm
• Highly visible confidence/alarm LEDs
• Supplied with user replaceable ½ AA batteries and Micro USB cable

Temperature + Humidity Data logger EL-GFX-D2 with external probe

This standalone data logger measures and stores over 250,000 temperature and humidity readings over a -30 to +80°C and 0 to 100%RH range at a resolution of 0.1°C and 0.1%RH.

The data logger features a high contrast dot-matrix LCD and three buttons to navigate through an on-screen menu. This menu provides the user with access to real-time trend analysis, data summaries and the ability to start, stop and restart the data logger without the need to connect the data logger to the host-PC. Users can reset the maximum / minimum reading using the onscreen menu; this introduces an 'event marker' into the data which can later be viewed in the graphing software ('Mark Events' option) and the data file after download.

The data logger is supplied complete with two lithium metal batteries, which can typically allow logging for up to 1 year. It can also be powered from USB.

• Temperature Measurement Range: -30°C to 80°C
• Temperature Resolution: 0.1°C
• Temperature Accuracy (logger error): ± 0.3°C typical
• Relative Humidity Measurement Range: 0 to 100%RH
• Relative Humidity Internal Resolution: 0.1%RH
• Relative Humidity Accuracy (logger error): ± 2.05%RH typical (20 to 80%RH)
• Long Time Stability 0.5%RH / year
• Dew Point Accuracy (overall error): ± 1.1°C typical
• Logging Rate Between: 10 seconds and 1 hour
• Battery Life: 1 year 2 x ½ AA 3.6V (depending on the using conditions)
• Dimensions of logger: 101 x 48.5 x 30.5mm
• Probe Dimensions: 37 x 12 x 8mm
• Cable Length: 2000mm

Version EL-GFX-SP2 with improved accuracy

• Temperature Resolution: 0.01°C
• Temperature Accuracy: ±0.2°C typical
• Humidity Accuracy: ±1.8%RH

Low cost reusable temperature/humidity data logger DWL20

This data logger can measure and store temperature/humidity readings automatically. It has a large LCD that can display realtime readings and logging information.This unit can start a sound and light alarm if exceeds the user set limits. More professional applications can be provided by the unique PC software DGraph under Windows xp/7/8/10 (32/64 bits). User can easily use the software to setup and download data to PC via USB and then view, analyse and print the data, or export other file formats(txt, xls, csv, bmp, jpg).

• Temperature Range: -35 °C to 80°C (DWL20 and DWL21) or -40 °C to 125 °C with external sensor (DWL20E and DWL21E)
• Humidity Range: 0-100 % RH
• Temperature Accuracy: ±0.3°C (DWL20, DWL20E, DWL21, DWL21E)
• Humidity Accuracy: ±3% RH (DWL20, DWL20E) or ±2% RH (DWL21, DWL21E)
• Temperature Resolution 0.1°C
• Humidity Resolution: 0.1 % RH
• Number of Readings 32 000 data points
• Start: immediately, button, at date and time
• Sample Rate 2 second to 24 hours
• Dimension 120 mm * 74 mm * 24 mm
• Net Weight 130g
• uses replaceable AAA 1.5 Battery or USB interface to power

FH625

Temperature + humidity data logger FH625

• new: user replaceable and calibrated temperature/humidity probe (Ref. R300). Never return the logger for recalibration again.
• temperature range for sensor: -40 to +85 °C
• humidity range: 0 à 95 % RH, no-condensing
• temperature precision: ±0.5°C from -6 to 50 °C, ±1 °C for the remaining scale
• humidity precision: ±2% from 0 to 60%, ±3% from 60 to 95%
• Alarm (Sound 80 db + Text)
• memory: 32000 points (16000/channel)
• recording intervall: 1 Hour, 8 Hours, 1 Day, 3 Days, 7 Days, or Custom (up to 10 Sec)
• ambient operating conditions: -18 to 50°C, 0 to 95 % RH non-condensing
• adapter 230 V/12 V
• backup with internal battery (for 12 hours)
• display: 16.5 x 11 cm, touchscreen, multiple screen views, on-screen zoom and scroll
• weight: 600 g
• download Type: USB (1:15 minutes) or FLASH Memory Card (36 seconds)
• software for data transfert: ref. A016 and SW400 for the calibration
• 21CFR11 software for data transfert, ref. A026

FH635

Temperature + humidity data logger FH635

• FH635: like FH 625 , +1 alarm relay

Data logger testo 174H

• is ideal for monitoring temperature and humidity sensitive goods in storage. The testo 174H also monitors building climate, continuously. The software ComSoft allows fast programming of the data logger and easy analysis.
• Humidity sensor with long-term stability
• High data integrity, even with empty battery
• Display of the current temperature or humidity value
• Compact and robust
• Issue of alarms via display
• Memory: 16.000 readings
• Battery type: 2 lithium batteries (CR2032)
• Dimensions 60 x 38 x 18.5 mm
• Temperature range: -20 to +70 °C
• Accuracy: ±0.5 °C (-20 to +70 °C)
• Resolution: 0.1 °C
• Humidity range: 0 to 100 % RH
• Accuracy: ±3 %RH (2 to 98 %RH)
• Resolution 0.1 %RH
• In order to operate you require the docking station (0572 0500). This is included in the price when purchasing a set.

Data logger Testo 175H1

• professional data logger for the monitoring of temperature and relative humidity in work and storage rooms. The external probe (stump) stands out thanks to faster reaction times in comparison to probes installed inside the housing
• waterproof according to IP 65
• integrated USB and SD card interfaces for reading out data
• Memory 1 000 000 readings
• Probe type NTC
• Measurement range -20 to +55 °C
• Accuracy ±0.4 °C (-20 to +55 °C)
• Resolution 0.1 °C
• Probe type humid. sensor, capacitive
• Meas. Range 0 to 100 %RH
• Accuracy ±2 %RH (2 to 98 %RH) at +25 °C
• Resolution 0.1 %RH
• Dimensions: 149 x 53 x 27 mm
• when the datalogger is connected to the computer, it is possible to transfer 'on line' the data and show them as curves

Datalogger Testo 177-H1

• Temperature range: -20 to +70 °C (internal sensor), -40 to +120 °C (external Sensor)
• Precision: ±0.2 °C (-25 bis +70 °C)
• Resolution: 0.1 °C
• Humidity range: 0 to 100 % rH (capacitiv sensor)
• Resolution: 0.1 % rH
• 4 Channels
• Memory: 48000 points
• ambient operating conditions: -20 to +70 °C
• Battery: Lithium-Batterie
• Weight 130 g
• Dimension: 103 x 64 x 33 mm

Data logger TR-72W

• Incorporate an Ethernet/ LAN interface
• Can be connected to wired or wireless LAN
• One external temperature sensor (with the humidity sensor): 0 to 50 °C
• One external humidity sensor: 10 to 95 % rH
• Measurement Accuracy: ±0.3°C(-20 to 80°C), 5 % rH
• Measurement Resolution Display: 0.1°C, 1 % rH
• Recording Interval 1,2,5,10,15,20,30 seconds,1,2,5,10,15,20,30,60 minutes
• Recording Capacity: 8,000 Readings x 2 Channels
• Recording Method Endless (Overwrite from the oldest data when recording capacity is full), One time Method (Stop recording when recording capacity is full)
• Power Source: Special AC Adaptor ( DC5V )
• Data Back-up: Saved for about 3 months with 1 lithium battery (CR-2032)
• Interface Wired LAN: 10 / 100 Base - TX RJ45 connector
• Wireless LAN:IEEE802.11b CF type Wireless LAN Card
• Dimentions: H55mm x W78mm x D39mm
• Weight 101g ( Including one battery )
• Browser Functions View Temperature and Humidity Data in Graph Form , Start Recording, Download Data , Monitor Current Readings , Check Back-up Battery
• Warning Mail Function E-mail: Register up to 5 addresses to receive mail
• Power Consumption: About 290mA ( when using wired LAN )
• Security Access Controlled IP Address , ID Password Authentication
• Working Environment for Main Unit Temperature : 0 to 50°C Humidity : 20 to 80%RH (without condensation)

MSR145

Data logger MSR145

• The MSR 145 is a miniaturised universal datalogger for measuring and recording different physical measurement parameters. It contains a temperature sensor, a humidity sensor with integrated temperature, a pressure sensor and a 3-axis accelerometer (X, Y and Z axes).
• Temperature range: -20 °C to +60 °C
• Humidity range: 0-100 % relative humidity
• Pressure: 0 to 2000 mbar absolute (optional: to 14 000 mbar absolute)
• Acceleration: ±10 g / ±2 g (switchable)
• Light: 0-65 000 Lux
• standard signal: 0 to 20 mA, 4 to 20 mA, 0 to 3.0 V, 0.5 to 4.5 V, 0 to 5.0 V, 1.0 to 6.0 V, 0 to 10.0 V, 0 to 12.0 V, 0 to 24.0 V
• Accuracy: ±0,5 °C max. (at -10 °C to +60 °C), optional ±0,2 °C max. (at 20 °C to 40 °C), < ±2 % relative humidity (at 10-90 % relative humidity, 0 °C to 40 °C), ±2,5 mbar max. (at 750-1100 mbar absolute), Acceleration: ±0,15 g (at 25 °C)
• Memory: 2 000 000 values, 1 000 000 000 values with an optional SD memory card
• Data storage rate:
  • for temperature: 1 /s, every 10 s, every 30 s, every 60 s
  • for humidity: 1 /s, every 10 s, every 30 s, every 60 s
  • for pressure: 20 /s, 10 /s, 2 /s, 1 /s, every 10 s, every 30 s, every 60 s
  • for acceleration: 20 /s, 10 /s, 1 /s, every 2 s, every 5 s, every 10 s, every 30 s, every 60 s
• Power supply: Rechargeable lithium polymer battery 188 mAh, the battery is charged via the USB connection, one battery charge is sufficient for operation of the unit for several months (measurement rate 1/minute).
• MSR145 S: for air, size 18 x 14 x 52 mm, weight approx. 13 g, sheath material PVC, IP60
• MSR145SW, MS145W: for air and water, size 27 x 16 x 53 mm, weight approx. 27 g, sheath material Silicon or polycarbonate, IP67
• Data transfert: with USB connection, software is included
• Different versions with only a few parameters (like temperature and humidity) are also available
• Option: loading station for automatic battery loading

Find your logger here

Data logger MSR160

Same base as MSR145.

Find your logger here

Data logger MSR165

• The MSR 165 is a miniaturised universal datalogger for measuring and recording different physical measurement parameters. It contains a temperature sensor, a humidity sensor with integrated temperature, a pressure sensor , a 3-axis accelerometer (X, Y and Z axes) and light
• Temperature range: -20 °C to +60 °C
• Humidity range: 0-100 % relative humidity
• Pressure: 0 to 2000 mbar absolute
• Acceleration: ±15 g, or ±200 g (option)
• Light: 0 to 300 Lux, max. sensibility at 580 nm
• Accuracy: ±0,5 °C max. (at -10 °C to +60 °C), optional ±0,2 °C max. (at 20 °C to 40 °C), < ±2 % relative humidity (at 10-90 % relative humidity, 0 °C to 40 °C), ±2,5 mbar max. (at 750-1100 mbar absolute), Acceleration: ±0,15 g (at 25 °C). 32 measurement values are recorded even before the shock event. So the user knows not only that a hard blow carried out, but also detects the exact timing of the blow.
• Memory: 2 000 000 Values
• Data storage rate:
  • for temperature: 1 /s, every 10 s, every 30 s, every 60 s
  • for humidity: 1 /s, every 10 s, every 30 s, every 60 s
  • for pressure: 20 /s, 10 /s, 2 /s, 1 /s, every 10 s, every 30 s, every 60 s
  • for acceleration: 1600 /s, 10 /s, 1 /s, every 2 s, every 5 s, every 10 s, every 30 s, every 60 s
• Power supply: Rechargeable lithium polymer battery 900 mAh, the battery is charged via the USB connection, one battery charge is sufficient for operation of the unit for several months (measurement rate 1/second), or a replaceable battery (3.6 V, 2 x 7700 mAh, Li-SOCl2), or the power pack module (5000 mAh)
• for air and water, size 39 x 23 x 72 mm, weight approx. 64 g, sheath material polycarbonate, IP67 (IP60 with the microSD card slot)
• For a longer recording period of up to five years, the MSR 165 can be equipped with replaceable batteries (3.6 V, 2 x 7700 mAh, Li-SOCl2). The batteries are stored in a splashproof cast aluminium case (122 x 92 x 70 mm, approx. 530 g)
• Data transfert: with USB connection, software is included
• Different versions with only a few parameters (like temperature and humidity) are also available
• Option: loading station for automatic battery loading
• For extensive analysis and graphical representation of the data recorded in shock mode and to automatically create reports, the new MSR ShockViewer analysis software, which is specifically tailored to the requirements of transportation monitoring, is at your disposal.

Find your logger here

Temperature and Humidity Data Logger MINNOW 1 TH

The Minnow logger is a portable, battery operated, temperature and humidity data logger able to store 65 520 samples of both temperature and humidity along with a time stamp.

• Temperature range: -30 °C to 80 °C
• Resolution: 0.01 °C
• Accuracy: +/-0.3 °C (5 to 60 °C) else +/-1.0 °C
• Humidity range: 0% to 100% RH
• Resolution: 0.01% RH
• Accuracy: +/-2% (20% to 80%RH), +/-5% otherwise
• Run Modes: start on button press, start at scheduled time, start on disconnect, real time logging (displays real time data when connected)
• Power: user replaceable CR2450 battery, up to 4 year battery life while logging
• Dimensions: 53 mm x 33 mm x 15 mm
• USB cable included with unit
• Free software to download in english for Windows and IOS (Apple, Mac)

Applications

• food fridges and freezers
• vaccine fridges
• cold chain transport
• medical storage
• air conditioning and heating
• animal and livestock transportation
• temperature mapping

Temperature and Humidity Data Logger Minnow 2.0 TH

The Minnow 2.0 is a precision temperature and humidity data logger with the highest temperature accuracy of any competing logger. With a standard accuracy of +/- 0.17°C and a calibrated accuracy of +/- 0.07°C the Minnow 2.0 is unmatched in accuracy and resolution for its price range.

A free Win / Mac PC application is provided with the Minnow logger and communications are made via a USB-A connector located under the protective cap.

• Range: -25°C to 75°C / 0 to 100 % RH
• Resolution: 0.01 °C / 0.016 % RH
• Accuracy: +0.17°C (from 0°C to 50°C ), +3% RH (20% to 80%), +5% RH else
• Alarms: High and Low alarms for all channels, Ability to enable or disable any alarm, Dedicated Alarm LED and LCD indicator
• Data storage: 65 000 samples for each channel (65K Temp + 65K Humidity)
• Logging interval (1 second, 10 seconds, 30 seconds, 1 minute, 10 minutes, 30 minutes or 1 hour)
• Start Modes: Push button start, Scheduled start, Start on disconnect from PC, Real time logging (stream to PC)
• Connections: USB-A male located under protective cap
• Ingress Protection: IP67
• Power: User replaceable 2 x CR2032 batteries, Over 2 years battery life while logging, Bypass mode: Unit is powered from USB when connected to PC to conserve the battery
• Dimensions: 79 mm x 43 mm x 12 mm
• Free software to download in english for Windows and IOS (Apple, Mac)

The Minnow 2.1 TH has an external temperature and humidity sensor. The external sensors are accessed by a single connector located under the protective cover. The included external input cover allows for secure retention of the cable while retaining the loggers IP67 rating.

• Range: -40°C to 90°C / 0 to 100 % RH
• Resolution: 0.01 °C / 0.016 % RH
• Accuracy: +0.17°C (from 5°C to 60°C ), +3% RH (20% to 80%), +5% RH else
• Cable length: 2 m
• Probe diameter: 5 mm

Temperature and Humidity Data Logger TZU03

This multi-Use PDF TEMP&RH Data Logger is the perfect tool for stand alone or cold-chain monitoring and documentation of temperature and relative humidity conditions that are critical in laboratories, pharmaceutical, medical, storage, freezers, coolers, shipping containers, warehouses, environmental monitoring and food storage applications.

Main features

• Designed to be Multi-use
• Temperature & Humidity measurement and recording
• Statistics available on LCD screen
• No software needed to retrieve data
• Automatically generates PDF report and CSV file
• Reprogrammable software for logging parameters,alarms,and start delay

Specifications

• Temperature Scale °C or °F
• Accuracy ±3%RH; ±0.5°C (-20°C ~ +40°C),±1.0°C(other range)
• Measurement Range Humidity 0%~100%RH, Temp -30°C ~60 °C
• Resolution 0.1%RH typically, 0.1°C
• Memory Capacity 12 000 values
• Recording Options Delayed or Push-To-Start Logging
• Record Interval 10 seconds to 18 hours adjustable [Default:10 mins]
• Start Delay Start Delay Programmable (0~254 mins) [Default:30 mins]
• Alarm Delay Programmable (0~960 mins) [Default:10 mins]
• Alarm Range Programmable high or low alarm limit for each channel, [Default:<2 °C or >8 °C, <40%RH or >80%RH]
• Shelf Life / Battery Typically 1 Years ;CR2032 3.0V Lithium Battery (Dependant on Sampling Rate and Environment)
• Report Generation Simultaneously generate PDF report and CSV files
• Communication Interface USB2.0
• Time Zone UTC +0:00 (Default)
• Dimensions 89mm x 36mmx 16mm
• N.W. 25g

High-end humidity and temperature datalogger Ref. EE310 up to 180 °C

This datalogger is optimized for reliable measurement in demanding industrial applications. In addition to highly accurate measurement of relative humidity and temperature, the transmitter also calculates parameters such as dew point, absolute humidity and mixing ratio.

Various models are available including wall, duct and remote probe. The remote probe can be used up to 180 °C and the pressure tight probe up to 20 bar (290 psi).

Key Features

• Measuting range: -40 to 180 °C, 0 to 100 % RH
• Accuracy: +/- 0.2 °C, +/- 1.3 % RH
• Highest measurement accuracy
• Wide working temperature range
• Calculation of all humidity related physical quantities
• TFT colour display with push buttons
• Integrated data logging for 20.000 values per measurand
• Error self diagnosis shown on display or via error LEDs
• Auditive and visual error warnings
• Two analogue outputs and Modbus RTU digital interface
• Rugged polycarbonate IP65 enclosure
• Modular enclosure concept for easy mounting and service
• Pressure tight probe up to 20 bar (290 psi)
• Pluggable probe for fast exchange and easy installation
• Power : 24 V AC/DC
• Two freely configurable alarm outputs
• Two analog outputs (0-1V/ 0-5 V, 0-10 V, 0-20 mA, 4-20 mA)
• Proprietary sensor coating for polluted environment
• Easy field adjustment and configuration via display or free software
• RS485 with Modbus RTU

Temperature and Humidity Data Logger RHTEMP80 & RHTEMP125

RHTemp80 and RHTemp125 data loggers records temperature and humidity up to 80°C and 125°C. They are mainly indicated for powders, corns and similar, drying applications monitoring.

The loggers can be used with different software:

• HumiPressureDisk, for quick and simple monitoring: start the devices, do your mission, download data and analyse.
• TS Manager, for deep analysis and control: a FDA 21 CFR Part 11 compatible software with multi-level access and reports according to regulations. Designed for validation in every field, from pharmaceutical / medical to laboratories, dentists and food.

The available versions are:

• Standard: with standard battery
• XL: longer, with long life battery

Loggers are connected to the PC by means of the DiskInterface HS (HumiPressureDisk software included).

Dimensions (High x Diameter mm): Standard= 46 X 17, XL= 71 X 17

Materials: Stainless steal AISI316L + POM (completely Food Grade) for RHTemp80, Stainless steal AISI316L + PEEK (completely Food Grade) RHTemp125

Temperature range: -20°C to +80°C for RHTemp80, -40°C to +125°C for RHTemp125

Temperature resolution: 0.015°C

Temperature accuracy: ± 0.2°C (0°C to +60°C) / ± 0.5°C (-40°C to +125°C)

Humidity range: 0% ÷ 100%

Humidity resolution: 0.02%

Humidity accuracy: ± 1.8% (0% to 85%) / ± 3% (85% to 100%)

Number of acquisitions: 10 100

Acquisition rate: From 1 every second up

Battery life

• Standard: user replaceable, >8 000 000 acquisitions at 25°C
• XL: user replaceable, >14 000 000 acquisitions at 25°C

Protection degree: IP67

Communications: DiskInterface HS (HumiPressureDisk included)

Operating Systems: Windows XP, Vista, 7, 8 (32, 64 bit)

Temperature and Humidity Data logger MSR145W with Display and Bluetooth

The MSR145 can now be equiped with a colour OLED display for a compact representation of data and graphic charts. The high screen resolution facilitates easy reading of measured values, even in total darkness and from virtually any viewing angle. The display is switched on and off manually; the desired display data can be configured in the MSR PC software program 'Set up'.

The wireless version of the MSR145 mini data logger facilitates easy and precise remote monitoring by means of the Bluetooth Low Energy (BLE) short-range radio technology. You can use the smartphone app to recall the current and last recorded values at any time, without delay. A smartphone, a PC or our BLE receiver box can transmit the measured data to MSR SmartCloud, if required.

Find your logger here

Temperature and humidity data logger MSR385WD with Display and wireless sensors

Due to the high levels of thermal resistance of its transmitter modules (MSR385SM), the new wireless data logger facilitates applications even at high operating temperatures of up to 125 °C (with silicone hose). The measured values are transmitted by means of transmitter modules equipped with temperature and humidity sensors (exist also with pressure sensors), in the unlicensed frequency band at 868 MHz, across distances of up to 500 m. The optimised power management ensures that – depending on the frequency of measurements and radio transmissions – the power supply to the miniature transmitter modules is warranted for up to five years.

The measured data of the transmitter modules recorded by the data logger can be read out via a USB interface and processed further using the MSR PC software for data analysis purposes. The MSR385WD has a colour OLED display, is capable of storing over one million measured values and can be equipped with up to ten transmitter modules.

Humidity range: 0-100 %RH

3 types of modules: Find your MSR385WD logger here

Temperature and HumidityData logger Bluefin with Bluetooth

It can be connected either via a USB cable to a Windows or Mac PC or wirelessly using Bluetooth to your iPhone, iPad or iPadMini. Both Windows, Mac and iPhone applications offer a simple means of configuring the logger, data extraction and data viewing features.

some typical applications

• transport of sensitive items
• food transportation
• storage of vaccines or chemicals
• animal transportation

The Bluefin logger operates from a rechargeable battery which can be recharged by connection to USB.

• Battery operation: 6 months
• Memory: 20 000 temperature + 20 000 humidity values
• Temperature range: -20 to 60 °C
• Temperature resolution: 0.04 °C
• Temperature accuracy: +/-0.3C over the range +5C to +60C
• Humidity range: 0-100 % RH
• Humidity resolution: 0.1 % RH
• Humidity accuracy: +/-2.0% over 20% to 80% humidity range
• Alarms with Led light
• Start Mode: remote start via Bluetooth, Push button, scheduled start, start on disconnect from PC
• They can be delivered with a NIST calibration certificate
• Dimensions: 50 mm x 68 mm x 20 mm, 54 g
• Compatibilty: Apple iPad, Mini 3. and 4 generation, Apple iPhone 4s, 5, 5c, 5s, 6, 6 Plus
• Free iPhone, iPad app, Windows and Mac Software.

Temperature and Humidity Data logger BT04 with Bluetooth

Embedded bluetooth communication module, sent out stored temperature and humidity values. Each BT04 is configured to have a unique ID (factory configuration or user configuration) that is used to uniqurely identify an object that holds the tag.

Specifications

• Signal transmission frequency: 2.400 - 2.4835GHz
• Protocol standard: Bluetooth 4.0
• Modulation mode: GFSK
• Send interval: 500mS
• Built in battery: 600mAh /3V (replaceable)
• Communication rate: 1Mbps
• Receiving sensitivity: 1Mbps@-85dbm
• Maximum transmission distance: 50 meters
• Memory capacity: 15000 values
• Batterylife: 300 days, depending on the recording intervall
• Net weight: 25g
• Size: 67mmx51mmx15mm
• Temperature range: -20 °C to + 60 °C
• Temperature accuracy: ±0.4°C
• Humidity detection range: 0 to 100%RH
• Humidity accuracy: ±4%RH

Description

Temperature/humidity wireless data logger Newsteo (external sensor)

The logger can transfer the data directly on a monitoring computer by radio frequencies (monitoring mode) or can store the data in its memory (recording mode).

Up to 500 loggers can communicate with one RF-USB stick connected to the computer. It is also possible to connect the PC to an Ethernet gateway. Recorders communicate with the gateway (collector) that sends data to a central data base.

specification

• external sensor
• temperature range: -40 to 85 °C depending on the sensor
• humidity range: 0 to 100 % RH
• sample interval: 1 second to 4 hours
• memory: 32768 points
• min/max value
• Lithium Thionyle battery, 1/2 AA or AA depending on ther version
• battery life: 2 years (for 1 mesurement/10 minutes)
• IP54
• dimension: 96 mm x 40 mm x 20 mm (antenna: 90 mm)
• RF range: 30 m to 1 km (there are different antenna sizes)
• frequency: ISM 868 MHz (Europe); 915 MHz (USA)
• possibility to start the recording with a magnet

applications

• storage control
• transport of fresh, frozen food, pharmaceuticals...

Temperature/humidity wireless data logger Newsteo (internal sensor)

The logger can transfer the data directly on a monitoring computer by radio frequencies (monitoring mode) or can store the data in its memory (recording mode).

Up to 500 loggers can communicate with one RF-USB stick connected to the computer.

specification

• internal sensor
• temperature range: -40 to 60 °C
• humidity range: 0 to 100 % RH
• sample interval: 1 second to 4 hours
• memory: 32768 points
• min/max value
• Lithium Thionyle battery, 1/2 AA or AA depending on ther version
• battery life: 2 years (for 1 mesurement/10 minutes)
• IP54
• dimension: 96 mm x 40 mm x 20 mm (antenna: 90 mm)
• RF range: 30 m to 1 km (there are different antenna sizes)
• frequency: ISM 868 MHz (Europe); 915 MHz (USA)
• possibility to start the recording with a magnet

applications

• storage control
• transport of fresh, frozen food, pharmaceuticals...

Wireless data logger Newsteo Tracker

The logger can transfer the data directly on a monitoring computer by radio frequencies (monitoring mode) or can store the data in its memory (recording mode). The parameters are temperature, humidity, acceleration, shock, light

Up to 500 loggers can communicate with one RF-USB stick connected to the computer.

specification

• internal sensor
• temperature range: -10 to +60°C +/- 0.4°C at 25°C
• humidity range: 0 to 100 % RH ± 3% (de 20 at 80% RH)
• light: 0 to 220 Lux +/- 30 Lux
• acceleration: 3 axiss, - 6g to +6g +/- 0,1g
• Free-fall height: 1 cm to 20 m +/- 5 cm
• sample interval: 1 second to 4 hours
• memory: 32768 points
• min/max value
• Lithium Thionyle battery, 1/2 AA or AA depending on ther version
• battery life: 2 years (for 1 mesurement/10 minutes)
• IP54
• dimension: 96 mm x 40 mm x 20 mm (antenna: 90 mm)
• RF range: 30 m to 1 km (there are different antenna sizes)
• frequency: ISM 868 MHz (Europe); 915 MHz (USA)
• possibility to start the recording with a magnet

applications

• storage control
• transport of fresh, frozen food, pharmaceuticals...

WiFi Temperature and Humidity Data Logging EL-WiFi-TH

• With WiFi capability and integrated display
• Wireless connectivity to PC via WiFi (802.11b compliant)
• Easy sensor set-up using free PC software
• View and analyse multiple sensors using the PC application, including immediate graphing of historic data
• Measurement range from -20 to +60°C
• Temperature resolution: 0.5 °C
• Temperature accuracy (overall error between -10°C and +60°C): +/-1 °C for the version WifiTH and +/-0.2 for the version Wifi-TH+
• Humidity accuracy (overall error between 20%RH and 80%RH): +/-3 % for the version Wifi-TH and +/- 2.5 for the version Wifi-TH+
• Capable of logging greater than 500,000 data set entries. Sensor memory stores all data even if WiFi is temporarily disconnected.
• IP55
• Logging rate (user configurable): every 10s to every 12hrs
• Rechargeable internal lithium polymer battery. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year.The battery can then be recharged via a PC or USB +5V wall adapter using the USB lead provided. Sensor readings may be inaccurate during battery charging.
• Configurable high and low alarms with indicator
• Max & Min readings
• Low battery indicator
• WiFi connection indicator
• Supplied with wall bracket and micro USB lead
• The software installed on the PC or an Android device will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available for free.
• The datalogger can be managed and monitored over the internet from any location in the world (Cloud). You can communicate with your sensor on any smartphone (there is also a Apple App for monitoring devices already on the cloud), tablet or PC. Monitor conditions, change sensor settings and receive email alerts instantly. There are three account types to choose from:
  • Free with 45 days storage, 100 email alerts/month, 2 devices max.
  • Personal: Unlimited data storage, unlimited email alerts, multiformat data export, report printing
  • Professional: Unlimited data storage, unlimited email alerts, multiformat data export, report printing, multiple locations, multiple users, administration panel, device audit trail

Each type of datalogger exist als in a 21Part11 version. 21CFR Cloud subscription delivers all of the flexibility of remote monitoring and can be installed as part of a 21CFR compliant system. Features include permission-based use, authority level sign-off and full system audit to ensure data monitored and collected is regulated to 21CFR Part 11 standard.

Temperature and humidity data logger Saveris 2

All relevant temperature and humidity measurements are precisely recorded by the Saveris 2 Wi-Fi data loggers and transmitted to the testo Cloud by wireless LAN. The measurement values are then securely stored online, and can be called up at any time using a Smartphone, tablet or PC. You can immediately be informed via e-mail or text (optional) alarm if limit values are exceeded.

The testo Saveris 2 Wi-Fi data logger system always includes a free access to the testo Cloud for the secure storage and analysis of all measurement values. Using your internet connected smartphone, tablet or PC, you can access critical data which are transmitted to the testo Cloud, anytime, anywhere.

At the moment there are 2 Cloud solutions.

different device versions:

testo Saveris 2-H1 with integrated temperature and humidityWi-Fi data logger with internal temperature and humidity sensor, incl. USB cable, wall bracket, lock, batteries and calibration protocol, Measuring range: -30 to +50°C / 0 to 100 %RH), Internal data memory for 2 x10 000 readings, Protection class IP40

testo Saveris 2-H2 with remote humidity probe connection Wi-Fi data logger with external humidity/temperature input, incl. USB cable, wall bracket, lock, batteries and calibration protocol, Measuring range: -40 to +70°C, Humidity range: -30 to +70°C, Internal data memory for 2 x10 000 measurement values, Dust and splash protection according to IP54

resolution: 0.1 °C, 0.1 %RH

voltage supply: 4 x AA batteries; power unit optional

battery life: 24 months at 25 °C

dimension: 95 x 75 x 30 mm

weight: 240 g

WiFi Temperature and Humidity Data Logging i-Celcius WRH

Available as a connector or as a probe

Temperature range: -40°C to 120°C

Relative humidity range: 0 to 100% RH

Accuracy: ±0.3°C typical, RH ±3% typical

dimension: 89x60x14 mm

weight: 102 g

battery: 1000 mAh Li-ion battery

Wi-Fi protocols: IEEE 802.11 b/g/n

Wi-Fi modes: W-Fi Direct, Infrastructure, Remote

Wi-Fi Encryptation: Wep, WPA/WPA2 Personal

Data storage on board: 1 week at once/minute sampling rate

Operating conditions: 0 to 40 °C, 10-90 % RH

iOS/Android App features: temperature and humidity display, graphs, alarms, export as text (CSV) or image

Newsteo Builder for measurement of the humidity and shrinkage of concrete

It is directly buried (antenna included) into the concrete and it records the corresponding measurements in its non-erasable embedded memory (which can be at any time read by a PC).

It can also transmit them in real time, without any wire, to a PC. As all the measurements are dated, the user gets the complete history of the supervised concrete.

Two versions of the Newsteo Builder, with or without the shrinkage sensor, are available.

Spécifications:

• temperature range: -20°C to +124°C
• humidity range: 0 to 100%
• shrinkage range: -300 to 800 µm/m
• working temperature: -20°C to +80°C
• autonomy: 3 to 7 ans with lithium battery (depending on the measurement frequency and the working temperature)
• measurements frequency: every 10 minutes to every 4 hours
• storage capacity: 32768 dated values
• protection: IP 68 (resistant to dust, to liquid concrete, suitable for continuous immersion in water under static pressure of 6 bar)
• dimensions : 67 mm x 73 mm x 29 mm.
• casing in tear-proof and unbreakable polyurethane
• Shrinkage sensor dimensions: 155 mm x 20 mm x 15 mm, connection cable : 40 cm

Sensorist Humidity Datalogger

With our multi-gateway redundancy Pro feature, you can cover large areas without the need to pair individual sensors with multiple gateways. Instead, you can pair sensors with a master gateway, pair additional gateways as slaves to the master, and from there, individual sensors will communicate with any gateway in the setup.

This makes it easy to cover large physical areas without having to worry about how sensors reach their gateway they pick the one they have the best connection to. This feature can also facilitate sensors being moved around. One sensor could be placed in a lorry that drives between two different locations, with a gateway at each location. The sensor will then deliver data as usual at location A. During transport between A and B, the internal buffer in the sensor will store measurement data. When the lorry arrives at destination B, the buffered data will be sent, making all data in the cooling chain fully available.

Alle modules have an internal temperature and humidity probe. (range -20 to 60 °C, 20-90 % RH)

Its is possible to add en external temperature probe, an external dor opening detector or a water detector.

Humidity + Temperature monitoring system with LoRa communication

It uses the 'Long Range' communications with very low power levels for distances quite equivalent the GSM phone. It needs a main station with communication over the LoRa network with under station (temperature and humidity dataloggers).

Main station specifications

• Maximum 5km Long distance measurement
• Backup battery for emergency use
• RS485/Modbus-RTU/audible and visual device supported
• Power supply: 12 V DC
• Memory: 32 MB (about 10 000 values)

Measurement unit specifications

• Built-in 3.6V/3500mAh, working life about 3 years
• Temperature range: -40°C to +125°C
• Humidity range: 0%RH to 100%RH

GPRS Temperature/humidity datalogger GPRS90-G

These temperature and humidity datalogger use the GPRS network for communication.

Spécifications:

• temperature range: -20°C to 70 °C (internal probe), -40 °C to 100 °C (external probe)
• humidity range: 0 to 100%
• temperature accuracy: +/- 0.3 °C, resolution 0.1 °C
• humidity accuracy: +/- 3 % RH
• battery autonomy with activated GPRS communication: 3 days
• storage capacity: 65000 dated values
• sample rate: 1 s to 24 h
• rechargeable Li Battery (2600 mA)
• delivered with 5 V/1 A adapter
• dimension: 140x76x28 mm
• weight: about 100 g
• version GPRS90TH with internal sensors and GPRS90EX with external sensors (delivered with the logger)
• software in english
• SIM card is not included with the datalogger

GSM Temperature and humidity datalogger GSM2X

These temperature/humidity datalogger uses the GSM network for communication. It can send alarms and temperature values per SMS. It has a large LCD that can display realtime readings and logging information. This unit can send GSM alarm message to authorized user mobile phone if temperature exceeds set limits, and the user can dial the data logger through any mobile phone to get temperature readings.

More professional applications can be provided by the unique PC software DGraphTM under Windows xp/7/8 (32/64 bits). User can easily use the software to setup and download data to PC via USB. And user can view, analyse and print the data, or export other file formats(txt, xls, csv, bmp, jpg).

Spécifications:

• temperature range: -35 °C to 80 °C with internal probe, -40 to 125 °C with external probes
• humidity range: 0-100 % RH
• temperature accuracy: +/- 0.3 (GSM20, GSM21, GSM20E, GSM21E), resolution 0.1 °C
• humidity accuracy: +/- 3 % RH (GSM20, GSM20E) or +/- 2 % RH (GSM21, GSM21E), resolution 0.1 % RH
• battery autonomy with activated GPRS communication: 1-3 days (and can also be connected to a fix power adapter)
• storage capacity: 32 000 dated values
• sample rate: 1 s to 24 h
• rechargeable Li Battery (2600 mA)
• delivered with USB cable
• dimension: 120x74x24 mm
• weight: about 100 g
• version GSM20/GSM21 with internal sensors and GSM20E/GSM21E with external sensors (delivered with the logger)
• software in english
• SIM card is not included with the datalogger

GSM Temperature and humidity logger TZ-TT11

It is a digital temperature and humidity transmitter, embedded GSM module.

• Dimensions: 122 mm x 81 mm 30.8 mm
• Exterior Power Supply 5V (with USB connector)
• Built-in Battery: 3.7V/4500mAh Lithium battery
• Built-in GSM antenna
• Flash Memory 32MBit
• Temperature range: -55°C to +125°C
• Temperature precision: +/- 0.5°C
• Humidity range: 20% to 80%
• Humidity precision: +/-1%
• Operating Temperature Range: -20°C to +60°C
• Operating Humidity: Up to 75% non-condensing
• Power Consumption Active mode(avg.): < 150mA
• Sleep mode(GSM module off)(avg.): < 0.67mA
• Sleep mode(GSM module on)(avg.): < 2mA
• Charging time: about 9 hours
• GSM chip SIMCOM GSM chip, 4 Frequency GSM 850/900/1800/1900mHz
• Battery Life: > 30days with every 5 mn operation with

Temperature / humidity recorder with GPRS communication Anycontrol GPRS

• Battery: 5000mAh 3.7V Lithium rechargeable battery
• Temperature Range:-20°C+60°C(built-in probe),-40°C+70°C (external probe)
• Temperature Accuracy: ±0.5°C (-10°C-45°C)
• Relative humidity range: 1 to 99%RH
• Relative humidity accuracy: ±5%RH (20%~80%RH)
• Battery charging time: Less than 8 hours
• Battery life: 15 days at 1 point every 2 min, 20 days at 1 point every 5 min, 25 days at 1 point every 10min, 60 days at 1 point every 30min
• Location: GPRS
• Alerts method: Audio and visual alarm on device, Email, SMS, APP
• Network cellular: 850/900/1800/1900 MHz
• Protection: IP65

Low cost reusable temperature / humidity data logger SSN20

• Internal replaceable 1/2 AA Lithium Battery
• Battery Life: 2-3 years, depending on Sample Rate and ambient temperatures
• Temperature Range -35 °C to 80°C (SSN20, SSN21, SSN22, SSN23, SSN22P) or -40 to 125 °C (SSN20, SSN21E, SSN22E, SSN23E)
• Humidity range: 0-100 % RH
• Temperature Accuracy ±0.3°C
• Humidity Accuracy ±3 % RH (SSN20, SSN20E, SS22, SSN22E, SSN22P) or ±2 % RH (SSN21, SSN21E, SSN23, SSN23E)
• Temperature Resolution 0.1°C
• Humidity Resolution: 0.1 % RH
• Without LCD Display (SSN20, SSN20E, SSN21, SSN21E) or with LCD Display (SSN22, SSN22E, SSN22P, SSN23, SSN23E)
• Software DGraph in English for free to download the data and configurate the dataloggers, the version SSN22P can generate a PDF file witthout to have to install a software on the PC
• Number of Readings 32 000 data points
• Start: immediately, button, at date and time
• Sample Rate 2 second to 24 hours
• Dimension 120 mm * 37 mm * 23 mm
• Net Weight 67g

Printing Temperature/Humidity Recorder Thermograph

The Thermograph recorder is intended to record temperature and humidity for vehicles (lorries) during the transportation of perishable goods, in an internal memory, using an external lead. The recored data can always be printed by using the built-in printer.

The temperature/humidity recorder for the refrigerator transport may include up to 4 inlet channels (leads).

On demand, the Termograf can be equiped with an USB interface and/or an alarm relay.

The LCD display will indicate the date, time, the number of recordings and the temperature and humidity at the time.

The Recorder is designed to be placed in the driver's cabin, and the external lead is to be mounted in the storage space.

The printer uses thermal paper.

The temperature and humidity lead can have a cable with the standard length of 5 m or 10 m, but the length can be set according to the client's preferences.

• Temperature range: -55 ° to +125 °C
• Temperature resolution: 0.1 °C
• Humidity range: 0-100 %
• Humidity resolution: 0.1 %
• LCD display with 2x16 characters
• Thermal paper for printing (width: 58 mm)
• Receipt listing: Company name, Location (vehicle number), Preset limits, Date (initially and every new day), time and the measured parameter

Temperature and humidity recorder TH6

TH621 specific description

• temperature range: 0 to +50°C
• humidity range: 10 to 95 % RH
• without digital display

TH622 specific description

• temperature range: 0 to +50°C
• humidity range: 10 to 95 % RH
• display for the values

TH623 specific description

• temperature range: 0 to 50°C, 0 to 85°C (selectable)
• humidity range: 0 to 95 % RH
• display for the values
• alarm
• external probe

TH625 specific description

• temperature range: 0 to 50°C, 0 to 85°C (selectable)
• humidity range: 0 to 95 % RH
• display for the values
• alarm with contact relay
• external probe

commun description

• temperature precision: ±0,5% for the full scale and ±1°C
• humidity precision: ±2% from 10 to 60%, ±3% from 60 to 95%
• respons time: 2.5 minutes
• recording time: 24 hours or 7 days selectable
• ambient operating conditions: 0 to 50°C, 0 to 95 % RH non-condensing
• adapter 220V/9V
• backup with battery
• battery life (average): 24 hours
• disc diameter: about 15 cm

Temperature and humidity recorder TH8

TH800 specific description

• temperature range: 0 to +50°C
• temperature sensor: thermistor
• humidity range: 10 to 95 % RH, non condensing
• recording time: 24 hours or 7 days selectable
• only wit batteries (4 x AA)
• batteries life: 1 week to 12 months depending on the rotation speed

TH801 specific description

• temperature range: 0 to +50°C
• temperature sensor: thermistor
• humidity range: 10 to 95 % RH, non condensing
• recording time: 24 hours or 7 days selectable

TH802 specific description

• temperature range: 0 to +50°C, 5 to +40 °C
• temperature sensor: thermistor
• humidity range: 10 to 95 % RH
• display for the values
• recording time: 24 hours, 7 days or 31 days selectable

TH803 specific description

• temperature range: -20 to 50°C, 5 to +40°C (selectable)
• temperature sensor: thermistor, remote probe
• humidity range: 0 to 95 % RH, remote probe
• display for the values
• audio/ visual alarm
• recording time: 24 hours, 7 days or 31 days selectable

general description

• temperature precision: ±1°C
• humidity precision: ±2% from 0 to 60%, ±3% from 60 to 95%
• dew point range (calculated): -30 °C to 50 °C
• dew point accuracy (calculated): ±4 °C from 10 to 95% RH
• respons time: 2 minutes for 63 % of the full scale
• ambient operating conditions: 0 to 50°C, 0 to 95 % RH non-condensing
• adapter 220V/9V
• backup with battery
• battery life (average): 24 hours
• disc diameter: about 24 cm

Thermo-hygrograph TIT / 01

It is is a portable recorder fore air temperature and humidity. The recording can be daily, weekly or monthly. To obtain optimum humidity measurement ensure that the thermo-hygrograph has be placed in a ventilated environment and that it is not exposed to direct sunlight or radiant heat sources.

• Element for measuring humidity: natural hair
• Humidity accuracy: ± 3% of 20 to 100% RH
• Temperature measurement element: bimetal (Bourdon tube)
• Temperature Accuracy: Class 1 to EN 13190
• Operating temperature: -20 ° C to + 50 ° C
• Clocks: mechanical spring or battery (AA-LR6, 1.5 V)
• Pen writing autonomy : 150 m.
• Stainless steel 304 polished case with high resistance to atmospheric agents and industrial smoke. Also available in white paint.
• Weight: 2800 g
• Available range for daily or weekly version: -35 ° C to + 45 °C 0 to 100% RH, -15 to + 65 ° C 0 to 100% RH, -15 to + 45 ° C 0 to 100% RH, -20 to + 60 ° C 0 to 100% RH, 0 to +40 ° C 0 to 100% RH
• Available range for monthly version: -10 to + 50 ° C 0 to 100% RH, -15 to + 65 ° C 0 to 100% RH, -15 to + 45 ° C 0 to 100% RH, 0 to +40 ° C 0 to 100 % RH

Disposable temperature / humidity data logger EasyLog

Available in packs of 10, the single-use data logger measures and stores both temperature and humidity information.  The unit comes pre-configured with High and LowAlarms - simply press the button to start logging. During a logging session, pressing the button will light up the status LEDs to give a quick indication of whether the temperature has exceeded an alarm condition at any point.

Once your session is completed, tear open the IP67-rated plastic wallet to reveal the USB connector and plug it in to your PC.  Use the free EasyLog CC software for Windows to download and graph the data.

Package: 10 pieces

Battery life: 12 months ( minimum)

IP Raiting: IP 67

Readings: 32 637 temperatures, 32 637 RH

Disposable temperature / humidity data logger Tempmate(R) GS

This single use datalogger offers real-time monitoring which is up-to-date with latest developments. With this GSM datalogger you are able to take actions in time and save your goods before it is too late. If necessary, a replacement of goods can be organised in a short time so that a delivery deadline will be met despite of a loss of goods. Lost or damaged shipment can be located and culprits can be clearly defined. Therefore, warranty claims will be fulfilled. All relevant measurement data can be continuously recorded by using tempmate.®- Cloud.

Recorded data can be easily shared with others via a link or an email. No Wide Range of Applications tempmate.®-GS can be used regardless of whether you send your goods by air, sea or road. I does not matter if you want to monitor food, medicaments, sensitive electronics or works of art, tempmate.®-GS can be ideally adjusted to suit your requirements.

No additional software is required, just a web browser with Internet access. Your data is securely protected against access from third parties and is saved in the Cloud. Databases are saved in multiply secured server centres in EU/ DE. Data protection and data integrity regulations are obeyed - we offer maximum security. You remain in complete control of costs as there are no additional 'hidden' charges. You purchase your device for a fixed price. The Cloud, mobile data, alarms and all functions are included. It does not matter where you want to send your shipment, you can be assured that tempmate.®-GS is ready for operation worldwide.

• Temperature Range : - 25°C to +70°C
• Temperature Accuracy ±0.2°C (–25°C/+60°C), others ±0.5°C
• Temperature Resolution 0.1°C
• Data Storage Capacity Max. 15 600 Records
• Humidity 0 to 100%rH / Accuracy [0..90%rH]< ±2.5%, [90%..100%] < ±3.5%
• Resolution Humidity 1 %
• Ambient Light 0 to 16000lx / Accuracy < 10%
• Resolution Ambient Light 1 lx
• Shelf-Life / Battery 2 Years at - 25°C to + 35°C / 2 x CR17450
• Recording Interval 10 min
• Recording Duration 90 Days
• Startup Mode Button
• Stop Mode Button
• Start Delay Possible 1 Minute to 48 Hours
• Case Material Polycarbonate
• Protection Class IP67
• Dimensions 113/59/24 mm (l/w/h)
• Weight 132g
• Certifications CE, EN12830, EMC, RoHS
• Validation Certificate Available as PDF in the Cloud
• Software tempmate.®-Cloud
• Report Generation Readable in the Cloud
• Password Protection Cloud Password Protection
• Connection Interface GSM Quad Band
• G Sensor 3-axis 6D-/4D- Orientation Detection/± 16 g / Accuracy: < ±2 %
• Alarm Configuration Up to 6 thresholds, Alarm Delay Programmable
• Programmable Via Cloud
• Alarm Type Single / Cumulative
• Storage Temperature - 25 °C to + 35 °C (Room Temperature Suggested)