Coating thickness

KERN TB

KERN TB Digital coating thickness gauge

• Auto-Power-Off
• Delivered in a hard carrying case
• Selectable measuring units: µm, inch (mil)
• Base plate and calibration foils included
• External sensor for better access to the test object (cable length: 1 m)
• Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
• Net weight approx. 0,25 kg
• Overall dimensions WxDxH 161x69x32 mm
• Min base thickness: 0.3 mm
• Min measuring area: 6 mm

KERN TC

KERN TC Digital coating thickness gauge

• Auto-Power-Off
• Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value.
• Min base thickness: 0.3 mm
• Selectable measuring units: µm, inch (mil)
• Base plate and calibration foils included
• Overall dimensions WxDxH 131x65x28 mm
• Net weight approx. 81 g

KERN TE Digital coating thickness gauge

External sensor for difficult-to-access measurements

External sensors with other measuring ranges are available on request

Data interface RS-232, included

Base plate and calibration foils included

Delivered in a hard carrying case

Offset-Accur: This function allows you to adjust the instrument precisely on the locally measured range by a two-point calibration. This results in a superior accuracy of approx. 1 % of the measured value

Selectable measuring units: µm, inch (mil)

Auto-Power-Off

MCT200 Coating Thickness Gauge

It is designed for non-destructive, fast and precise coating and film thickness measurement. It is widely used in manufacturing,metal processing industry, chemical industry.commodities inspection and other testing areas. Measuring range from 0 to 10 mm, can meet the different industries in view of the workpiece surface coating thickness testing requirements. It is a good professional precision instrument to improve the production efficiency and the qualified rate, saving the cost of production.

The measurement is based on magnetic induction & Eddy current. With different external probes, the gauge can be applied to measuring thickness of non-magnetic coating on magnetic Metal substrate,as well as non-conductive coating on non-magnetic metal substrate.

Features

• Working temperature: -10°C to 50 °C
• Relative humidity: <=90 %
• The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium and heavy dust.
• Five types of probes (F400,F1, F10,N1,CN02) are available for different applications, F10 probe measures up to 10mm. Depending on the gauge it is possible to measure thickness of non-magnetic coating on magnetic metal substrate, as well as non-conductive coating on non-magnetic metal substrate.
• Two calibration methods can be applied to the gauge.The system error of the probe can be corrected with the basic probe calibration method.
• Two measuring modes: single or continuous, changeable.
• Measuring status indicator shows the measuring status.
• Measured values and user information are shown on a large, easy-to-read LCD.The display back light ensures easy reading of screen data in low light conditions.
• Battery information indicates the rest capacity of the battery.
• Auto sleep and auto power off function to conserve battery life.
• USB1.1 communication port, optional software to process the memory data on the PC.
• The gauge equips with data-pro software, can do measurement results transmission, automatic storage management, measurement data analysis, measurement reports print etc.
• Compact aluminum case, suitable for use under poor working conditions.

MR200 Surface roughness tester

The MR200 surface roughness tester is a new upgrade instrument which adopts the newest processor. This instrument adopts needle scanning method to test the surface roughness of the work piece. When measuring roughness of part surface, the probe is placed on the surface of the part and then tracing the surface at constant rate. The probe acquires the surface roughness by the sharp stylus in probe. The roughness causes displacement of probe which results in change of inductive value of induction coils thus generate analogue signal which is proportional to surface roughness at output end of phase-sensitive rectifier. This signal enters data collection system after amplification and level conversion. After that, those collected data are processed with digital filtering and parameter calculation by ARM chip and the measuring result can be read on OLED display. The results can be printed by Bluetooth printer.

Features

• 28 Measuring parameters: Ra, Rq, Rz, Rt, Rp, Rv, RS, RSm, Rz(JIS), Ry(JIS), RSk, R3z, Rmax, RPc, Rmr, Rku, RΔa, RΔq, Rδc, Ry; Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, V0
• Adopt 320μm high accuracy inductance probe
• Four filter methods of RC, PC-RC, GAUSS, D-P
• Compatible with four standards ISO, DIN, ANSI, JIS
• Adopt 2.7 inch 128×64 dot OLED display,without back-light and dead spot. Capable of showing all parameters, profile graph and Chinese/English menu
• Adopt the most popular DSP chip to control and process data
• Build-in storage can memorize 20 sets of complete measurement data
• External SD Card can expand mass data storage
• Build-in wireless remote control module to remote control measurement
• Build-in Bluetooth module can be connected with the Bluetooth printer to print all the parameters and profiles
• Build-in Micro-USB port, can communicate with PC make measurement results analysis by data processing software
• Build-in lithium-polymer rechargeable battery and charging protection circuit
• Mechatronics design, smaller and portable to carry
• Automatic shut down for power saving, each operation step has a hit message
• Full accessories, options for curve surface probe, deep groove probe, small hole probe, tiny hole probe, tooth surface probe, small pillar, height adjust platform, extension bar, lateral transfer rod etc.