Centrifuge

Sprout Mini-Centrifuge

Two new SnapSpin rotors (a six-place standard rotor and an eight-place strip rotor) snap-in and out for fast and easy changes. Two sets of adapters accommodate all major microtube and PCR® tube styles (2.0, 1.5, 0.5, 0.2 mL) for customized use.

This desk centrifuge is ideal for microfilter cell separations and HPLC samples. With most spins lasting around 20 seconds, the ergonomically designed lid was specifically designed to fit in the palm of the hand for easy repeat opening and use. Made with UV resistant plastic.

Operation is now faster and easier: Snap in rotor, load and close. For repeated spins, simply close the lid to reactivate. An internal safety switch ensures the Sprout will not operate with the lid open. Small footprint offers minimal benchtop space and removable cord for compact storage.

Designed and tested to comply with U.S., Canada and European safety standards.

Specifications:

• Maximum speed: 6000 rpm
• Maximum RCF (relative centrifugal force): 2000 x g
• Dimensions: 153 x 128 x 104 mm

included with the centrifuge

• Two easy change, tool-free rotors:
• Six-place standard rotor for 1.5/2 mL tubes
• Eight-place strip rotor for two 0.2 mL tube strips or 16 single tubes
• Six 0.2 mL and six 0.5 mL adapters for customized use
• Storage Case – Keeps rotors and adapters contained and dust-free
• Tube Rack – Convenient for handling samples before and after quick spins

Gusto High-Speed Mini-Centrifuge

This compact centrifuge is ideal for most protocols calling for fast spins (up to 12 500 rpm / 9 800 rcf) and quick spin-downs. Useful for PCR®, microfilter cell separation, clinical applications, and HPLC protocols. Operation is extremely simple for this high-level of sophistication: Insert tubes, close lid, adjust speed/time, and press Start. For duplicate spins, simply reload rotor and push Start. Designed with quick-spin option for commonly used 20-second spins. Also includes a tool-free, quick-change rotor system.

• Safety features ensure the unit will not operate with an open lid, a jammed rotor or when out of balance.
• Tested to comply with U.S., Canadian and European Safety and EMC standards.
• Designed for 1.5/2.0 mL and 0.5/0.2 mL microfuge tubes
• Variable speed settings 500-12 500 in 100 rpm increments
• Variable timer 1sec – 30 minutes in 1 second increments
• Selectable digital display of speed in Xg and rpm
• Low noise and vibration
• Small footprint
• Universal power adapter accepts worldwide voltages
• Quick spin or user settable rpm to prevent over compaction
• Tube positions clearly numbered
• Double insulated construction

Specifications

• Speed: 500 – 12 500 rpm
• RCF (relative centrifugal force): 9 800 x g
• Dimensions: 203 x 171 x 114mm
• Power: 100 to 240 VAC, 50/60 with four interchangeable power cords for U.S./Japan/Taiwan, Continental Europe/Israel, Australia and United Kingdom

included

• Two rotors: 12 place standard rotor with lid for 1.5/2 mL tubes, 8-place strip rotor for four 0.2 mL tube strips or 32 single tubes
• Twelve 0.2 mL and twelve 0.5 mL adapters for customized use

Capp Rondo Microcentrifuge

electronic safety brake provides immediate stop on lid opening

for 8 x 1.5/2.0 mL tubes

supplied with additional strip rotor and adaptators for 0.2/0.4 mL microtubes

very compact

available in 2 versions

Model CR-68: fix speed 6000 rpm, 2000 g

Model CR-68X: programmable speed up to 6000 rpm, 2000 g, timer function

Capp Rondo Clinical Centrifuge CRC-416X

Thiscentrifuge has 3 optional rotors wich can be exchanged: two fixed angle rotors for 8x15mL and 16x10mL tubes and a swing-out rotor with the capacity of 6x10mL tubes. This swing out centrifuge operates at a variable speed ranging from 500 to 4.000 RPM, corresponding to 2.270g. The speed can be set up with intervals of 10 RPM.

It is equipped with a robust brushless DC motor, ideally suited for extended runs and providing maintenance free, long lasting and quiet operation.

The swing out rotor centrifuge is equipped with a safety lid brake, preventing the lid from opening under operation. CAPP swing out rotor centrifuge has a compact design and low loading height, enabling easy and efficient operation.

Up to 99 individual protocols can be saved on the centrifuge. A single touch on the operational panel gives you access to the short spin function. The swing out centrifuge is supplied with multiple tube adaptors.

See below which adaptors are provided along with the 3 rotors to choose from.

Technical information

• Rotor types (to choose at the order): 6x10mL (swing-out) / 8x15mL (fixed angle) / 16x10mL (fixed angle)
• Max. Speed: 4.000 RPM / 2.270g (swing-out rotor)
• Speed Settings: 500-4.000 RPM in steps of 10 RPM
• Timer Settings: 1-999 minutes or infinite mode
• Programmable Features: Up to 99 user defined protocols
• Lid Lock Safety: Yes
• Imbalance Detection: Yes
• Dimensions (LxWxH): 415x355x173mm
• Weight: 7.7kg (without rotor)

Adaptors for rotor CRC-4-6S (swing-out):

• 8mL, 9mL, 10mL tube adaptor - 6 pcs. of each
• 6mL sleeve - 6 pcs.
• 2mL, 3mL, 4mL tube adaptor - 6 pcs. of each
• 2mL, 3mL, 4mL sleeve - 6 pcs.

Adaptors for rotor CRC-4-8 (fixed angle):

• Tube spacer 2mL, 3mL, 4mL - 8 pcs. of each
• Tube sleeve for 6 mL - 8 pcs.

Adaptors for rotor CRC-4-16 (fixed angle):

• Tube sleeve for 9mL, 10mL - 16 pcs. of each
• Tube sleeve for 6mL - 16 pcs.
• Tube spacer 2mL, 3mL, 4mL - 16 pcs. of each

Mini-Plate Centrifuge MPC22

It uses an unique design for the horizontal rotor centrifuge (Patented). The plate or tubes set into the rotor with 2pcs slope-rotor-shelf. It can quickly spin down droplets and condensation and is for use before and after thermal cycling to improve PCR yield and other tests. The MPC-22 combines functionality, easily operation and comfort.

Features

• Unique design for the horizontal rotor.
• It can accept 2 pieces of these formats: PCR standard plates with skirted, non-skirted., Elisa Plates, 8x0.2ml PCR strip tubes, 0.2ml PCR tubes
• Rotor Speed 2200rpm
• G Force 480xg
• Timer 0-10min
• Braking time from max.speed: lower than 30 sec.
• Short-spin and timing of two operations make the tests more convenient.
• Streamline design with more compact shape and transparent PC lid.

Mini-Centrifuge MC-4/6

MC-4/6 Series Mini-Centrifuge is compact and cost effective, allowing any workstation to be equipped with a "personal" mini centrifuge. It includs 2 quick release interchangeable rotors, two speed options (4000 rpm & 6000 rpm). The electronic brake can reach quick deceleration to reduce handling time.

Features

• Quick release rotor hub allows for easy rotor exchange.
• Electronic braking system for rapid sample processing.
• MC-4/6-1: for 8X1.5/2.0ml tube rotor, 4 place PCR strip rotor, 1200xg (4000rpm), 2000xg (6000rpm)
• MC-4/6-2: for 6x1.5/2.0ml, 6x0.5ml tubes, 2-8x0.2ml PCR strip rotor
• MC-4/6-3: 48well 50ul PCR plate rotor, 4x5ml Eppendorf-tubes rotor
• Dimensions 135x147x107mm
• Weight 1kg
• Power Supply AC 100-240V, 50/60Hz

Mini-Centrifuge MC-6/MC-7/MC-10

The MC-6,MC-7,MC-10 is available with some different rotor configurations.

Features:

• Colorful outer shell (green, red, blue).
• Low noise.
• Carbon fiber rotor.
• MC-6: 2000xg, 6000 rpm, 6x1.5/2.0 ml angle rotor, 2-8x0.2 ml strip rotor, rotor for slide, maximum noise <50Db, 30 W.
• MC-7: 2300xg, 7000 rpm, 6x1.5/2.0 ml angle rotor, 2-8x0.2 ml strip rotor, maximum noise <50Db, 30 W.
• MC-10: 5000xg, 10000 rpm, 6x1.5/2.0ml angle rotor, maximum noise <50Db, 40 W.

High-Speed Mini-Centrifuge MC-13/MC-14

Extremely quiet. Low noise levels.

With LCD display.

Capacity: 12 x 1.5/2.0ml tubes.

Low sample heating (only 12°C after 30 min, at max. speed).

Autoclavable rotor (121 deg.C, 20min).

Timer 20 sec to 99min

Includes standard rotor made of anodized aluminum.

Dimensions in cm (WxDxH) 24x21.2x13.8

Power supply 100V or 240V 50/60Hz

Optional adapter accessory for 0.2 ml PCR tube adapter or 0.5ml PCR tube adapter

MC-13: Max. rotational speed 13400 rpm/min, relative centrifugal force (RCF) 12100xg, acceleration time to max. speed 40 s, Braking time from max. speed 52 s, power requirement 100W

MC-14: Max. rotational speed 14500 rpm/min, relative centrifugal force (RCF) 14500xg, acceleration time to max. speed 42 s, Braking time from max. speed 55 s, power requirement 100W

Centrifuge Centrisart® A-14 and A-14C

The A1C rotor is specially designed for our Vivaspin ® 500 ultrafiltration unit, but it can also be operated with conventional 1.5 and 2 mL reaction vials. It supports applications for concentrating samples, e.g. antibody solutions, sample deionization or buffer adjustment, as well as the removal of contaminants with small or very large molecular weights.

The powerful compressor cooling of the Centrisart ® A-14C ensures fast and accurate cooling of the sample and reliably protects it from heat.

Accessories only for A-14C

A2B24x1.5mLRVA14: Angle rotor, 24 × 1,5 – 2 ml, polysulfone lid

A1C12x0.5mLVSA14: Angle rotor for 12 × Vivaspin® 500, or 12 × 1.5 – 2 ml

Centrifuge Centrisart® D-16C

The Centrisart ® D-16C universal benchtop centrifuge with medium capacity and cooling is very versatile in the lab. The maximum speed of 15,300 min-1 also allows for applications in molecular biology. In its low-speed range, the Centrisart® D-16C is appropriate for gentle handling of cells or sensitive samples. The gradual deceleration curves ensure gentle deceleration and keep the sample from being churned up. This gentle function can also be beneficial when microtiter plates are used. Thanks to the use of adapters, the Centrisart ® D-16C is also perfectly suited for high-throughput applications with spin kits utilizing 1.5 mL | 2 mL vessels.

• Max. speed rpm: 15 300
• Max. capacity: 4 × 100 ml
• Max. gravitational field: 21 913 g
• Min. speed rpm: 100, low speeds also possible
• Temperature range: -10°C to +40°C, with 1 °C step
• Quick cool program, guaranteed 4° C at max. speed; rotor cooling even possible during downtimes
• Coolant: CFC-free (R134a)
• Motor: maintenance-free, brushless drive motor
• Lid-lock release: Motorized locked lid, automatic lid-lock release
• Lid: Inspection window for independent speed measurement, easy-to-open lid port
  
• Rotor: otor detection for fixed angle rotors, swinging rotors
• Rotor chamber: Stainless-steel
• Imbalance safety mechanism
• Timer: 10 sec. to 99 min., short run, continuous run
• Programs: 50
• Rotor safety: Automatic detection, cycle counting of the rotors
• Dimensions (W × D × H): 550 × 570 × 310 mm
• Height with open lid: 705 mm
• Weight of Rotor: 60 kg
• Noise level at max. speed: < 65 dB

Accessories

YCSR-A9B: Fixed angle rotor for 6 × 50 ml culture tubes include hermetic aluminum lid

YCSR-S5B: Complete set – Swing-out rotor for microtiter plates, including carriers for microtiter plates. Max. height 56 mm; max. load per carrier 335 g

YCSR-A4B: Fixed angle rotor 24 × 1.5-2 ml reaction vials, include hermetic aluminum lid

YCSR-S1B: Swinging rotor, 4 inserts, for buckets B9Bdia45mmS3B

YCSB-B9B: Round bucket for rotor S1B-D16, sealable with cap, for adapter AxxxxxxB9B, 1 set = 2 pcs.

YSCA-A9B: Round carrier for one 50-ml culture vessel, 1 set = 2 pcs.

YSCA-A0B: Round carrier for two 15-ml culture vessels, without cap only, 1 set = 2 pcs.

YSCA-AAB: Round carrier for four 1.5 | 2.0 ml reaction vials, max. d 11 mm, 1 set = 2 pcs.

YSCA-ABB: Round carrier for 30-ml vessels with stand-up edges or a flat bottom, max. d 25 | 31 × 65 to 95 mm, 1 set = 2 pcs.

YCST-D16C: Centrifuge table made of painted steel housing with 2 doors and room for accessories, moveable, with locking castors, dimensions: W 550, D 600, H 497 mm

Centrifuge Centrisart® G-16 et Centrisart® G-16C

These two benchtop centrifuges were specially developed for high-capacity applications. Thanks to the variety of rotor options, nearly all vessel types can be used for low to high throughput.

Their high capacity makes both centrifuges genuine all-rounders. They can be used for almost any application. Their large program memory gives you the option of storing and retrieving several programs at any time. Their gradual deceleration curves ensure gentle deceleration and keep samples from being churned up. This is particularly advantageous, for example, when using microtiter plates. The powerful compressor cooling of the Centrisart® G-16C ensures fast and accurate cooling of samples and reliably protects them from heat.

Accessories

YCSR-A5B: Angle rotor 6 × 50 ml, for vessels made of plastic or stainless-steel d 28.5 × 101.5 mm, with hermetically sealed aluminum lid

YCSR-A6B:Angle rotor for 24 × 1.5 - 2 ml reaction vials, with hermetically sealed aluminum lid

YCSR-A7B Angle rotor 4 × 80/85 ml, for vessels made of plastic or stainless-steel d 38 × 103 mm, with hermetically sealed aluminum lid

YCSR-A8B: Angle rotor 6 × 85 ml for vessels made of plastic or stainless-steel d 38 × 112 mm, with hermetically sealed aluminum lid

YCSR-S2B: Swinging rotor, 4 inserts, for buckets B8Bdia85mmS2B

YCSR-S6B: Complete set – swinging rotor including carriers for microtiter plates and caps. Max. height 55 mm; max. load per carrier 290 g

YCSB-B8B: Round bucket, sealable with cap, for round carriers d 85 mm, A2Bxxxx to A8Bxxxx, and 400 ml bottle, max. vessel length approx. 110 mm, 1 set = 2 pcs.

YCSA-C3B: Round carrier for five 15-ml culture tubes, max. d 23 mm, 1 set = 2 pcs.

YCSA-C4B: Round carrier for three 50-ml culture tubes, 1 set = 2 pcs.

YCSA-C5B. Round carrier for 1 flat-bottom bottle (approx. 250 ml), max.d 61,5 × 90 – 125 mm, 1 set = 2 pcs.

YCSA-C6B: Round carrier for twenty 1.5 | 2.0 ml reaction vials, max. d 11 mm, 1 set = 2 pcs.

YCSA-C7B: Round carrier for nine 15-ml culture tubes, caps, max. d 23 mm, 1 set = 2 pcs.

YCSA-C8B: Round carrier for four 50-ml culture tubes (without caps), 1 set = 2 pcs.

YCSM-B8B: Round locking cap for buckets B8Bdia85mmS2B

YCST-G16C: Centrifuge table made of painted steel housing with 2 doors and room for accessories, moveable,

with locking castors W 650, D 647, H 497 mm for G16C

Centrifugeuse Centrisart® G-26C

The high-speed refrigerated Centrisart ® G-26C achieves a gravitational field of up to 62,000 g and approaches the level of ultracentrifuges in this regard. That makes it ideally suited for high-speed applications.

Thanks to the variety of rotor options, nearly all vessel types can be used for low to high throughput. Even applications in cell culture or microbiology sectors can be carried out with this centrifuge.

• Max. speed rpm: 26 000
• Max. capacity: 6 x 85 ml
• Max. gravitational field: 61 973 g
• Min. speed rpm: 100
• Temperature range: - 20 °C to + 40 °C in 1 °C increment
• Quick cooling: Quick cool program, rotor cooling even possible during downtimes
• Coolant: CFC-free (R404a)
• Motor: Maintenance-free, brushless drive motor
• Signal: Acoustic signal, can be switched off, configurable signal length
• Lid-lock release: Motorized locked lid, automatic lid-lock release
• Lid: inspection window for independent speed measurement, easy-to-open lid port
• Rotor: Rotor detection for fixed angle rotors, swinging rotors
• Rotor chamber: Stainless-steel
• Imbalance safety mechanism: Automated imbalance control
• Timer: 10 sec. to 99 min., short run | continuous run
• Programs: 60
• Rotor safety: Automatic detection, cycle counting of the rotors
• Dimensions (W × D × H): 570 x 616 x 460 mm
• Height with open lid: 890 mm
• Weight: 100 kg
• Noise level at max. speed: <63 dB

Accessories

YCSR-A5B: Angle rotor 6 × 50 ml, for vessels made of plastic or stainless-steel d 28.5 × 101.5 mm, with hermetically sealed aluminum lid

YCSR-A6B: Angle rotor for 24 × 1.5-2 ml reaction vials, with hermetically sealed aluminum lid

YCSR-A7B: Angle rotor 4 × 80/85 ml, for vessels made of plastic or stainless-steel d 38 × 103 mm, with hermetically sealed aluminum lid

YCSR-A8B: Angle rotor 6 × 85 ml for vessels made of plastic or stainless-steel d 38 × 112 mm, with hermetically sealed aluminum lid

YCSR-S3B: Swinging rotor, 4 inserts, for buckets

YCSB-B9B: Round bucket, sealable with cap, 1 set = 2 pcs.

YCSA-A9B: Round carrier for one 50-ml culture vessel, 1 set = 2 pcs.

YCSA-A0B: Round carrier for two 15-ml culture vessels, without cap only, 1 set = 2 pcs.

YCSA-AAB: Round carrier for four 1.5 | 2.0 ml reaction vials, max. d 11 mm, 1 set = 2 pcs.

YCSA-ABB: Round carrier for 30-ml vessels with stand-up edges or a flat bottom, max. d 25 | 31 × 65 – 95 mm, 1 set = 2 pcs.

YCSA-ACB: Round carrier for 3 × 5 ml test tubes, 1 set = 2 pcs.

YCST-G26C: Centrifuge table made of painted steel housing with 2 doors and room for accessories, moveable,

with locking castors W 570, D 616, H 481 mm

PCR Centrifuge BK-GL16E

microprocessor control and LED display

brushless motor, maintenance free

electrick lid lock, over speed and imbalance protection

specifications

• max capacity: 10 x 5 mL
• max speed: 16000 rpm
• max RCF: 19040 g
• speed accuracy: +/- 20 rpm
• temperature range: -20 to 40 °C
• temperature accuracy: +/- 1°C
• time range: 1-99 min.
• power supply: 230 V
• external size: 480 mm x 480 mm x 275 mm
• weight: 43 kg

angle rotor

• 40 x 0.2 mL, max speed 16000 rpm, RCF 19040 g
• 30 x 0.5 mL, max speed 13000 rpm, RCF 13900 g
• 40 x 0.5 mL, max speed 13000 rpm, RCF 17210 g
• 12 x 1.5/2 mL, max speed 16000 rpm, RCF 17940 g
• 20 x 1.5/2 mL, max speed 14000 rpm, RCF 15580 g
• 24 x 1.5/2 mL, max speed 14000 rpm, RCF 17950 g
• 10 x 5 mL, max speed 16000 rpm, RCF 17800 g
• 4x8 x 0.2 mL PCR, max speed 14000 rpm, RCF 13720 g

CappRondo Refrigerated Centrifuge

Molecular and cellular applications, such as ethanol precipitation, phenol extraction, NA preparation, cell collection or spin-down of temperature sensitive reaction mixtures, can all be comfortably conducted on CappRondo refrigerated centrifuge.

Operating with the maximum speed of 17.000 rpm (27.237 g), CappRondo refrigerated microcentrifuge offers multiple rotor options.

CappRondo refrigerated centrifuge operates with temperatures ranging from -20°C to 40°C. It cools down the samples to the temperature of 4°C in just 5 minutes.  The chamber of the refrigerated centrifuge is rust-free and Teflon-coated.

For standard 1.5mL and 2.0mL microtubes, the refrigerated centrifuge offers a 24- or 30-place rotor. Both rotors have an angle of 45 degrees, hole diameter of 11.1mm and can accommodate tubes up to 52mm in height.

For the 1.5mL and 2.0mL microfilter tubes, the refrigerated microcentrifuge provides an 18-place rotor, fitting tubes up to 65mm in height. Multiple further rotors are available for the refrigerated centrifuge - see the chart below providing an overview of all rotor types available for this refrigerated microcentrifuge.

The compressor-off function prevents from unnecessary cooling and frosting while the lid is open.

CappRondo refrigerated microcentrifuge provides quiet and stable operation, keeping the noise level at only 56 dB.

The parameters can be changed upon operation unless the Key Lock Function is activated.

CappRondo Clinical Centrifuge

It is a powerful blood separation centrifuge, providing 6500 rpm, corresponding to the centrifugation force of 3.873g. It has a rotor capacity for eight 15mL tubes. Smaller tubes like 1.5mL, 2mL, 5mL, 7mL and 10mL can also be used for blood separation, thanks to the additional adaptors provided with the instrument. This centrifuge is fully compatible with the majority of standard collection tubes. The noise level has been reduced to less than 60 dB. The large digital display of Capp clinical centrifuge shows you the current speed and time settings. The speed setting is highly precise, starting from 500 up to 6500 rpm with 100 rpm increments.

This clinical centrifuge is equipped with a brushless DC motor, maintenance free and absolutely perfect for long runs. User safety has been in focus by designing the centrifuge for blood separation. The safety brake system prevents the lid from accidental opening until the rotor stops completely. This separation centrifuge is a compact and reliable, ideal for blood centrifugation applications involving volumes below 15mL. It stands out on its category for having great features that allow a reliable performance, ease of use and safety. The imbalance detection function will notify you when the tubes have been loaded unevenly. Try the CappRondo centrifuge for blood separation along with BluCapp 15mL tubes or smaller Expell centrifuge tubes.

Features

• Maximum speed RPM / RCF (g): 6500 rpm / 3873 g
• Speed setting: 500 to 6500 rpm (increments of 100 rpm)
• Timer: 0.5 to 30 minutes or infinite time
• Imbalance detection: yes
• Dimensions: 260 x 244 x 205 mm
• Noise: < 60 dB
• Weight: 4 kg
• Rotors and adaptors included: 8x10/15mL, adaptors for 5mL, 7mL, 1.5mL and 2mL tubes