Motor Stirrer

Motor driven tissue grinder G10/G20

• tissue grinder and homogenizer for resuspending pellets or disupting tissues in micro centrifuge tubes
• G10 :speed = 12000 rpm, life time of the rechargeable battery = 4 hours, wiht no load
• G20 :speed = 1200 rpm , life time of the rechargeable battery = 10 hours, wiht no load
• power supply: 3.7 V Lithium battery
• dimensions: 155x25 mm
• net weight: 200 g

Motor driven tissue grinder G50

• tissue grinder and homogenizer for resuspending pellets or disupting tissues in micro centrifuge tubes
• adjustable speed ranging from 3000-8000 rpm
• with loop current control to avoid motor burnout by heavy load, protects battery and power source
• big torque brushless motor
• power outpout: 50 W
• power supply: 12 V DC, 5 A
• dimensions: 170x50x26 mm
• net weight: 145 g

Motor driven tissue grinder D500

• viscosity up to 10 000 mPas
• 6 modes of motor speed from 10 000 to 30 000 rpm
• 316L stainless steel schafts are atoclavable
• easy dismantling and fast preparation
• all shafts are interchangeable
• working volume: 10 to 40 000 mL
• power outpout: 500 W
• power supply: 220-240 V / 50-60 Hz
• net weight: 1.3 g
• Noise: 79 dBA
• IP20
• Operating environnement: 0-40 °C, 0-85 % RH

Motor Stirrer Eurostar 20

It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 - 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

• Stirring quantity max. (H2O) 15 L
• Motor principle Brushless DC
• Speed display LED
• Speed range 0/30 - 2000 rpm
• Reversible direction of rotation no
• Viscosity max. 10000 mPas
• Output max. at stirring shaft 42 W
• Permissible ON time 100 %
• Torque max. at stirring shaft 20 Ncm
• Setting accuracy speed 1 ±rpm
• deviation of speed measurement n > 300rpm 3 ±rpm
• deviation of speed measurement n < 300rpm 1 ±%
• Stirring element fastening chuck
• Chuck range diameter 0.5 mm-10 mm
• Hollow shaft, inner diameter 11 mm
• Fastening on stand extension arm
• Extension arm diameter 16 mm
• Extension arm length 220 mm
• Housing material alu-cast coating / thermoplastic polymer
• Dimensions (W x H x D) 86 x 248 x 208 mm
• Weight 4.4 kg
• Permissible ambient temperature 5 - 40 °C
• Permissible relative humidity 80 %
• Protection class according to DIN EN 60529 IP 40
• Voltage 230 / 115 / 100 V, 50/60 Hz
• Power input 70 W

High Speed Stirrer RC

Stirring shaft height is adjustable

Overheated protection device and indicators

With a digital tachometer and analog ampermeter.

Standard Accessories:

• Shaft: Ø8x600mm
• Propeller: No. 11 Ø50 mm, Ø80mm.
• Stand base: W400xD315xH54mm, 8kg.
• Holder

Model RC750: 750 W, speed 0-5000 rpm. Torque 7 kg/cm, Weight 22 kg, Power 110/220 V 50/60 Hz

Model RC1000: 1000 W, speed 0-6000 rpm. Torque 18 kg/cm, Weight 25 kg, Power 110/220 V 50/60 Hz