Sysmatec

Oven / Thermo chamber

Oven Snol 20/200 and 200/200

  • Max temperature: 200 °C
  • Economical low temperature electric ovens that are intended for the thermal processing of various materials and parts up to a temperature of 200 °C. The products can be used in scientificlaboratories, educationalinstitutions, medicine, and industry. Optionalforced air circulation (only in model SNOL 200/200) assures an even temperature distribution throughout the chamber, and high quality thermal processing occurs quickly.
  • Chamber made of mild steel or stainless steel
  • Natural or forced air circulation
  • Hermetically sealed doors
  • Microprocessor temperature controller
  • Includes standard shelves (2 pieces included)
  • High-quality, ecological thermal insulation material
  • Low electric power usage for increased energy efficiency
  • Short heating up/cooling down period
  • High degree of accuracy
  • Exterior painted with powder coating (RAL 7035)
  • 230 V
SNOL 24/200 LSP01 SNOL 200/200 LSP11 SNOL 200/200 LSN11
Volume (L) 24 200 200
Ext. dimensions (mm) 400x515x410 653x639x965 653x639x965
Int. dimensions (mm) 300x380x200 540x500x680 540x500x680
Power (KW) 1 2 2
Weight (kg) 17 77 77
Airflow no yes yes
Material mild steel mild steel stainless steel


Oven Snol 20/300, 60/300, 120/300, 220/300 and 420/300

They are designed for thermal treatment of various materials up to 300°C. These electric oven are designed for thermal treatment such as drying, heating, thermal testing, aging and similar purposes in an air-flow environment. Forced air convection allows a homogenous temperature distribution during all process, which ensures optimal results. Good technical parameters ensure to high-quality results. Oven can be used in scientific laboratories, educational institutions, medicine and industry.

  • Maximal temperature: 300 °C
  • Control panel is placed in under part of the oven
  • Ventilation motor on back side
  • Forced horizontal air circulation
  • Inside casing in 304 stainless steel
  • 3 stainless steel shelves
  • Outside casing in metal sheet, powder painting grey
  • Insulation rock wool (complete lack of asbestos)
  • Door opening on the right, inner door in stainless steel, silicon joint
  • OTP (over temperature protection)
  • Microprocessor – temperature controller
  • Air fan speed controller
  • Buzzer
  • Low electric power usage for increased energy efficiency
  • Short heating up / cooling down period
  • 230 V 50 Hz

Options

  • Economical version (Ec) without fan speed controller and buzzer
  • Additional shelves
  • Reinforced shelves
  • Metal tray
  • Digital timer
  • RS232/RS-485/USB interface
  • Furnace exterior made of stainless steel
  • Table for supporting the furnace
  • Process observation window
SNOL 20/300 LSN11 SNOL 60/300 LSP11 SNOL 120/300 LSN11 SNOL 220/300 LSN11 SNOL 420/300 LSN11
Volume (L) 20 60 120 220 420
Ext. dimensions (mm) 460x680x640 600x760x720 750x780x880 730x500x620 1000x500x860
Int. dimensions (mm) 240x280x340 380x380x420 550x400x580 930x880x915 1200x930x1200
Power (KW) 1 2 2.2 4 6.2
Weight (kg) 36 49 68 91 178
Airflow yes yes yes yes yes
Material stainless steel stainless steel stainless steel stainless steel stainless steel


Oven Snol 3/1100, 8.2/1100, 13/1100, 22/1100 and 39/1100

High accuracy electric muffle furnaces are universal laboratory furnaces, designed for materials testing, heat treatment such as hardening, loosening, normalising, ceramic and stoneware samples firing up to 1100°C. To eliminate gasses or smokes that are released during thermal processing, exhaust system may be additionally installed in the products. The furnace is excellent fit for scientific laboratories, educational institutions, ceramic studios, medicine and industry.

Basic model

  • One-piece high thermal efficiency vacuumed ceramic fiber chamber
  • Heating elements are embedded in vacuum formed fiber in four sides around a chamber
  • Outside casing in metal sheet, powder painting grey
  • Door opens upwards
  • Door safety interlock switch
  • Control panel is placed in under part of the furnace
  • Microprocessor temperature controller
  • Ceramic bottom plate
  • Fast heating time due to low thermal mass construction
  • Low power consumption
  • Good stability and uniformity

Options

  • Process observation window (o 35 mm) up to 1100 °C
  • Fan-assisted chimney for air extraction
  • Additional ceramic hearth plates
  • Buzzer
  • Digital timer
  • Protection against overheating
  • Data recorder
  • RS232/RS-485/USB interface
  • Calibration of temperature measurement system
  • Table for supporting the furnace
  • Protective gas atmosphere
  • Gas box up to 1100 °C
SNOL 3/1100 LHM01 SNOL 8.2/1100 LHM01 SNOL 13/1100 LHM01 SNOL 22/1100 LHM01 SNOL 39/1100 LHM01
Volume (L) 3 8.2 13 22 39
Ext. dimensions (mm) 340x470x430 440x620x510 500x700x550 600x890x610 649x899x739
Int. dimensions (mm) 125x200x115 200x300x133 225x360x180 275x500x155 315x515x225
Power (KW) 1.7 1.8 1.8 3 6
Weight (kg) 18 28 38 58 74


Ofen

Laboratory Bench Top Oven - Type AX

The Apex AX Series Ovens are a range of 250°C laboratory ovens, comprising three bench-top sized models that are equipped with the R38 digital PID temperature controller.

  • Maximum operating temperature: 250°C
  • Equipped with the R38 digital PID temperature controller
  • Fan convection for rapid heating & excellent uniformity
  • Chemically resistant stainless steel liner
  • Two adjustable nickel-chrome plated wire shelves
  • Lever latch door & airtight silicone seal
  • Compliant with safety standard BS EN 61010-2-010:2003

Options

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • Digital countdown timer to switch oven off
  • Additional sets of shelves & runners
  • Lockable door
  • Low voltage options for use below 220 V
  • Routine spares kit
AX30 AX60 AX120
Volume (L) 28 66 128
Temp uniformity (°C) +/- 5 at 250 °C +/- 5 at 250 °C +/- 5 at 250 °C
Ext. Dimension (mm) 440x590x465 540x690x565 640x690x565
Int. Dimension (mm) 295x300x320 385x400x420 495x500x520
Shelves fitted / accepted 2/4 2/6 2/8
Max Power (KW) 1 1.5 2
Hlding Power (KW) 0.342 0.465 0.622
Weight (kg) 24 37 55
Air changes per h 65 28 14


Ofen

Laboratory Oven Type PF

Laboratory ovens of the Peak series 300°C are available as both PF fan convection and PN natural convection models. Fan convection provides greater temperature uniformity and faster recovery rates than natural convection ovens.

  • Equipped with PID temperature controller
  • Fan convection for rapid heating & recovery & excellent uniformity
  • Chemically resistant stainless steel liner
  • Two nickel-chrome plated wire shelves
  • Lever latch door & airtight silicone seal
  • Compliant with safety standard BS EN 61010-2-010:2003

Options

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • Access port for independent thermocouple, cable entry ports
  • Accessory shelves & runners
  • Variable speed fan control
  • Stoving & curing options for extraction of small volumes of volatile solvents (not compatible with viewing window option)
  • Viewing window (not compatible with stoving & curing option)
  • Interior light (not compatible with stoving & curing option)
  • Air exhaust fan
  • Moisture extraction option (comprising sealed seams and air exhaust fan)
  • Stacking frame to enable units to be stacked one upon another
  • Lockable door
  • Door switch to isolate elements and fan
  • Fixed or castor mounted floor stands
  • Low voltage options for use below 220 V
  • Routine spares kit
PF30 PF60 PF120 PF200
Volume (L) 28 66 127 230
Temp uniformity (°C) +/- 5 at 300 °C +/- 5 at 300 °C +/- 5 at 300 °C +/- 5 at 300 °C
Ext. Dimension (mm) 470x665x470 570x765x570 670x865x670 920x965x670
Int. Dimension (mm) 300x290x320 400x390x420 500x490x520 750x590x520
Shelves fitted / accepted 2/3 2/5 2/9 2/15
Max Power (KW) 1 1.5 2 2.7
Holding Power (KW) 0.56 0.775 0.9 1.18
Weight (kg) 30 45 60 75
Air changes per h 50 21 11 6


Ofen

High Temperature Bench Top Oven - LHT

These models offer the high temperatures that are more typical of an industrial oven in a design that is compact enough to fit onto a laboratory bench.

  • Maximum operating temperature: 400°C, 500°C or 600°C
  • Chamber volumes: 30, 60 or 120 litres
  • PID controller
  • Heavy duty convection fan for good uniformity
  • Low thermal mass insulation for high energy efficiency
  • Corrosion resistant, brushed stainless steel interior
  • 2 Multi-position shelves
  • Suitable for continuous operation
  • Hard wearing, zinc coated & stoved epoxy polyester coated exterior

Options

  • Cable entry ports
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • Viewing window (not compatible with stoving & curing option)
  • Stoving & curing options for extraction of small volumes of volatile solvents (not compatible with viewing window option)
  • Variable speed fan
  • Floor stands & stacking frames
  • Routine spares kit
  • Air exhaust fan (may alter achievable uniformity)
LHT4/30, LHT5/30, LHT6/30 LHT4/60, LHT5/60, LHT6/60 LHT4/120, LHT5/120, LHT6/120
Volume (L) 30 60 120
Temp uniformity (°C) +/- 5 at max Temp +/- 5 at max Temp +/- 5 at max Temp
Ext. Dimension (mm) 570x860x550 670x930x670 920x1060x650
Int. Dimension (mm) 300x300x305 400x400x405 645x455x405
Shelves fitted / accepted 2 2/3 2/4
Max Power (KW) 1 1.5 2.25
Weight (kg) 73 99 179


Oven

Oven PF30-SC

For solvent evaporation

  • Air forced oven up to 300 deg C
  • Volume 28 liter
  • Internal stainless steel
  • Internal dimension: W292 * D320 * H300 mm
  • External dimension: W665 * D470 * H470 mm
  • Digital microprossessor, Pid temperature controller
  • Timer
  • Two shelve
  • Exist also in other sizes


Ofen

Laboratory Chamber Furnace type ELF11

These laboratory furnaces have a simple drop down door and a top mounted ceramic chimney. The combination of low thermal mass insulation and free radiating wire elements embedded in the chamber sides provide efficient heating.

  • Maximum operating temperature: 1100°C
  • Drop down door with air gap to minimise external temperature
  • PID controller, with single ramp to set-point & process timer
  • Delayed start / process timer function as standard
  • Vacuum formed, low thermal mass insulation
  • Hard ceramic hearth fitted as standard
  • Ventilated via top mounted ceramic chimney

Options

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
ELF11/6 ELF11/14 ELF11/23
Volume (L) 6 14 23
Max. continuous operating temperature (°C) 1000 1000 1000
Ext. dimension (mm) 580x410x420 630x450x520 715x505x690
Int. dimension (mm) 165x180x210 210x220x310 235x255x400
Shelves fitted / accepted 2 2/3 2/4
Max Power (KW) 2 2.6 5
Weight (kg) 24 31 52


Ofen

Wire Wound Single Zone Tube Furnace type MTF

This simple and economical design provides a furnace which can be used without the need to purchase an accessory work tube.However, should vacuum or a modified atmosphere be required, it is necessary to use a separate slide-in work tube in order to provide the required length needed to fit end seals. Similarly, in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required.

  • 1000°C or 1200°C maximum operating temperature
  • 15 mm, 25 mm or 38 mm inner diameters
  • 130 mm, 250 mm, 400 mm or 850 mm heated length
  • Integral wirewound work tube
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Delayed start / process timer function as standard
  • Horizontal configuration mounted on control module

Options

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of additional work tubes is available in a variety of materials
  • Insulation plugs & radiation shields to prevent heat loss & improve uniformity
  • Modified atmosphere and vacuum assemblies are available
  • Alternative mounting options are available
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
MTF10/15/130 MTF10/25/130
Max. continuous operating temperature (°C) 900 900
Tube diameter (mm) 15 25
Ext. dimension (mm) 360x200x240 360x200x240
Max Power (KW) 0.4 0.4
Weight (kg) 3 3


Temperature test chamber AMT31

two sided galvanized steel plate

insulating material: hard polyurethane and glass fiber

forced air circulation with centrifugal fan

heating with nichrome heater and cooling with compressor (refrigerant R404a)

temperature controller with touchscreen display, resolution 0.1 °C, 0.1 min

temperature range: -40 to 180 °C

temperature deviation: < +/- 2°C

internal size: 250 x 300 x 400 mm (Volume = 30 L)

external size: 997 x 460 x 800 mm


Temperature and humidity test chamber AT

interior in stainless steel

exterior in steel plate with coating

double layer high temperature resistant and high density seal between door and chamber body

heater: stainless steel electric heater

airflow cycling system

refrigeration system compressor (refrigerant 404A)

temperature and humidity controller with 100 programs and 120 steps each

communication with computer with RS232 and RS485

power: 220 V / 50 Hz

humidity range: 30-98 % RH

temperature ranges: -20 to 150 °C, -40 to 150 °C, -60 to 150 °C, -70 to 150 °C

Model AT100 AT225 AT500 AT800 AT1000
internal size (cm) 45x45x50 50x60x75 70x80x90 80x100x100 100x100x100
external size (cm) 105x97x177 105x10x200 132x132x217 147x152x232 167x152x232
power (KW) 6 7 13.5 15 16.5


Contact

Top

Sysmatec
Oberdorfstrasse 51
CH 3930 Eyholz
tel + 41 27 946 80 18
fax + 41 27 946 86 42
info@sysmatec.ch