|
Thermostatically controlled water bath type Ecotherm
Low-cost water baths for general use, made of white polypropylene (PP),
Thickness 10mm, electronic controls for easy operation,
Temperature range of 5 ° C above ambient to 100 ° C, heating in stainless steel.
Electronic control, 7-segment LED display, display of actual value or setpoint, input of the setpoint in 0.1 degree C steps.
Safety Equipment: Temperature control system for sensor failure.
Optionally equipped with integrated circulation to improve the temperature distribution within the bath.
|
|
Water bath Ecotherm E5
Work space dimensions B 230 x H 200 x D 125 mm
Exterior dimensions 355 x H 258 x D 145 mm
Bath content 5 l, Weight 3.3 kg, accuracy + / - 0.4 ° C, 500 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E5U
with circulation, 9l/min circulation, maximal temperature 95 ° C
Work space dimensions B 230 x H 200 x D 125 mm
Exterior dimensions 355 x H 338 x D 145 mm
5 l bath content, weight 4.2 kg, accuracy + / - 0.2 ° C, 500 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E10
Work space dimensions B 230 x H 200 x D 230 mm
Exterior dimensions 355 x H 258 x D 250 mm
Bath capacity 10 l, weight 5 kg, accuracy + / - 0.4 ° C, 1000 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E10U
with circulation, 9l/min circulation, maximal temperature 95 ° C
Work space dimensions B 230 x H 200 x D 230 mm
Exterior dimensions 355 x H 258 x D 250 mm
Bath capacity 10 l, weight 6 kg, accuracy + / - 0.4 ° C, 1000 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E11
Work space dimensions B 380 x H 120 x D 230 mm
Exterior dimensions B 505 x H 178 x D 250 mm
Bath capacity 11 l, weight 5 kg, accuracy + / - 0.4 ° C, 1000 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E11U
with circulation, 9l/min circulation, maximal temperature 95 ° C
Work space dimensions B 380 x H 120 x D 230 mm
Exterior dimensions B 505 x H 178 x D 250 mm
Bath capacity 11 l, weight 6 kg, accuracy + / - 0.4 ° C, 1000 W, 230 V / 50Hz
|
|
Water bath Ecotherm E19
Work space dimensions B 390 x H 200 x D 245 mm
Exterior dimensions 515 x H 258 x D 300 mm
Bath capacity 19 l, weight 6.5 kg, accuracy + / - 0.4 ° C, 2000 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E19U
with circulation, 9l/min circulation, maximal temperature 95 ° C
Work space dimensions B 390 x H 200 x D 245 mm
Exterior dimensions 515 x H 258 x D 300 mm
Bath capacity 19 l, weight 7.5 kg, accuracy + / - 0.3 ° C, 2000 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E30
Work space dimensions B 390 x H 200 x D 380 mm
Exterior dimensions 515 x H 258 x D 435 mm
Bath capacity 30 l, weight 9 kg, accuracy + / - 0.4 ° C, 2500 W, 230 V / 50 Hz
|
|
Water bath Ecotherm E30U
with circulation, 9l/min circulation, maximal temperature 95 ° C
Work space dimensions B 390 x H 200 x T 380 mm
Exterior dimensions 515 x H 258 x T 435 mm
Bath capacity 30 l, weight 10 kg, accuracy + / - 0.3 ° C, 2500 W, 230 V / 50 Hz
|
|
Water bath Ika ICC basic eco 8 c
- Classification according to DIN 12876:: III
- Identification according to DIN 12876 FL
- Heat output: 2000 W
- Temperature range: -20 °C to 150 °C
- Working temperature: room temp. +10K @1000rpm °C to 150 °C
- Temperature display: yes
- Temperature control: PT 100
- Safety temperature sensor: PT1000
- Working temperature display: LED
- Safety temperature display: LED
- Temperature stability DIN 12876: 0.02 ±K
- Display resolution: 0.1 ±°C
- Display for operation with ext. sensor yes
- Heat control accuracy: 0.1 ±K
- Warning function optical: yes
- Warning function acoustic : yes
- Warning function excess temperature: yes
- Warning function insufficient temperature: no
- Adjustable safety circuit: 0 °C to 160 °C
- Sub-level protection: yes
- Over-level protection: yes
- Pump type: Pressure- / suction pump
- Pump capacity adjustable: yes
- Pump pressure max. (0 liters discharge flow) 0.3 bar
- Pressure pump (suction side) (0 liter flow) 0.2 bar
- Pump flow rate max. (0 bar back pressure) 18 l/min
- Bath depth min.: 150 mm
- Calibration option: yes
- Appliance fastener: clamp
- Technical data complies with the standard: DIN 12876
- Permissible ON time: 100 %
- Dimensions (W x H x D): 145 x 340 x 200 mm
- Weight: 3.75 kg
- Permissible ambient temperature: 5 - 40 °C
- Permissible relative humidity: 80 %
- Protection class according to DIN EN 60529: IP 21
- RS 232 interface: yes
- USB interface: yes
- Voltage 230 / 115 V, 50/60 Hz
- Power input 2100 W
The ICC thermostats are prepared for connecting an external pump connection sets (Ref. PCS.ICC) and a cooling coil (Ref. CC2).
|
|
Water bath UWT
Can also be used for the heating of external tanks or baths (external circulation).
WT1 with one pump and WT2 with 2 pumps.
Casing: Polypropylen (PP)
Material strength: 10 mm
Pump flow rate: 12 L/min with inflow and outflow tube (2 x 12 L/min for WT2)
Power supply: 230 VAC
Power: 1850 W for the Ref. WT1, 2700 W for the Ref. WT2
|
|
Multiple Water bath RWB
Multiple Water Bath for extraction or distillation with ether or other flammable materials.
The heating is done by a external heating (like a water bath), which must be positioned outside the danger zone.
Different models:
- RWB 4: 4 round-bottom flasks
- RWB 6: for 6 round-bottom flasks
- WARC 10: 10 for round-bottom flasks
|
|
|