Sysmatec

Accessories

PTFE Spray

PTFE Spray

  • Release and anti-blocking agent as well as lubricant for laboratory
  • dry and greaseless
  • CFC-free
  • silicone-free
  • heat resistant up to +260°C
  • non-adhesive and dirt-repellent
  • physiologically safe
  • excellent gliding and separating effects


PTFE Paste

PTFE Paste (Ref. S 1870-16)

  • temperature resistance: from -36°C to +260°C
  • chemical resistance: excellent
  • extremely stable, synthetic high-temperature paste in resealable tube
  • exceptionally low friction coefficient
  • extremely long-lasting
  • resists high mechanical loads
  • not soluble in most solvents
  • non-flammable
  • oxygen-resistant
  • compatible with all common elastomers and plastics
  • chemical resistance against aggressive chemicals or solvents


PTFE Grease

PTFE Grease (Ref. S 1872-16)

  • temperature resistance: from -20°C to +270°C
  • chemical resistance: excellent
  • high-performance grease
  • exceptionally low friction coefficient, fine PTFE particles lower the friction between the surfaces
  • also suitable as anticorrosive, does not contain any heavy metals


HPLC Distributor

HPLC-Distributors for Bottles, PP

  • Temperature resistance: from -20°C to +140°C
  • Chemical resistance: very good
  • autoclave: 121° C
  • Green screw cap made of glass-fibre reinforced PP for bottle thread GL 45 and body made of PP
  • Plugs for closing unused ports are included in delivery.
Ref. Nr Suitable for thread

GL

Four ports for tubing outer diameter

mm

D 606-08 45 1.6 to 4
D 608-08 45 6


Multiple Distributors for Barrels, PTFE

Temperature resistance: from -200°C to +250°C (autoclavable)

Chemical resistance: very good

Pressure: 1 bar

Vacuum: suitable

Screw cap made of glass-fibre reinforced PTFE for barrels with female thread, body with GL-threaded necks made of PTFE. The product is only exposed to PTFE.

For drawing or inserting aggressive or pure liquids. Inserting tubing, tubes and probes into barrels

Ref. Nr For female barrel thread Necks GL For tubing O.D. max. mm
D 696-08 R2" 4x18 10
D 696-14 R2" 2x18/1x25 2x10/1x14
D 697-08 Mauser 2" 4x18 10
D 696-14 Mauser 2" 2x18/1x25 2x10/1x14
D 698-08 Tri-Sure 2" 4x18 10
D 698-14 Tri-Sure 2" 2x18/1x25 2x10/1x14


Multiple Distributors with Stopcocks, PTFE

Black screw cap made of PPS for bottle thread GL 45, body made of PTFE. Each neck with stopcock. Tubing can not be inserted through the stopcocks. Bores with press fit on the lower side allow the connection of tubing with O.D. 6 mm so that a connection to the bottom can be made.

  • Temperature resistance: from -20°C to +110C (autoclavable at 121 °C)
  • Chemical resistance: very good
  • Vacuum: suitable
Ref. Nr For tubing O.D. max. mm Stopcocks Stopcock bore dia. mm Necks GL
D 616-08 8 2 4 2x14
D 616-16 8 3 4 3x14


Gas wash bottle

Gas wash bottle

  • material: PTFE, FEP, borosilicate
  • PTFE body with screw cap and two lateral GL 18 threaded necks
  • FEP inlet tube and a gas distributor with finest bore
Ref. Nr volume

ml

bottle thread Thread of screw cap GL Total height

mm

N 1662-14 500 GL 45 2 x 18 207
N 1662-24 1000 GL 45 2 x 18 256
N 1662-34 500 GL 80 2 x 18 186
N 1662-44 1000 GL 80 2 x 18 256


GL-Reduction

GL-Reductions

  • Material: PTFE, PPS
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
  • Black screw cap made of PPS with GL14- 45 thread, movable reduction body made of PTFE for transition to GL threads.
  • The body can be moved independently from the screw cap so that the completely assembled reduction can be removed and fixed on another vessel without the risk of disarranging the tubing or cable.
  • The product is only exposed to PTFE.
Ref. Nr from cap GL on screw neck GL Max. tubing O.D. mm
D 784-01 18 14 0.8 to 8
D 784-03 25 14 0.8 to 8
D 784-04 25 18 1.6 to 10
D 784-06 32 18 1.6 to 10
D 784-08 45 14 0.8 to 8
D 784-16 45 18 1.6 to 10
D 784-24 45 25 1.6 to 10


GL Adaptor

Ground Joint GL Adaptors, PTFE

  • Material: PTFE, PPS and PP
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
  • Transition from a ground joint to a glass thread. The body can be turned independently from the screw cap. The completely assembled adaptor can be removed and fixed on another bottle without the risk of disarranging the tubing.
  • Applications: assembly of components with ground joint (condensers, stirrer bearings etc.) on glass bottles or GL-threaded necks.
Ref. Nr For bottle thread GLS Cap material Ground joint NS
D 734-40 45 PPS (black) 29/32
D 734-44 45 PPS (black) 45/40
D 734-50 80 PP (blue) 29/32
D 734-54 80 PP (blue) 45/40


GL Adaptor

Tri-Clamp GL-Adaptor, PTFE

  • Material: PTFE
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
  • for transition of Tri-Clamp as per DIN 32 676 to a GL-threaded neck.
  • Applications: for connection of hard-walled tubing (such as glass, stainless steel) or fluoroplastic tubes (such as PTFE, PFA and FEP) with screw joints to Tri-Clamp components as per DIN 32 676
Ref. Nr Plate diameter mm for tube I.D. mm/DIN connecting thread GL
D 901-02 25.5 8/DN08 14
D 901-04 25.5 10/DN10 18
D 901-06 25.5 10/DN10 25
D 901-22 34 10/DN10 14
D 901-24 34 16/DN15 18
D 901-26 34 20/DN20 25
D 901-42 50.5 26/DN25 14
D 901-44 50.5 26/DN25 18
D 901-46 50.5 32/DN32 25
D 901-48 50.5 38/DN40 14
D 901-72 91 66/DN65 18
D 901-74 91 66/DN65 25
D 901-76 91 66/DN65 45


Evaporating Dish

Evaporating Dishes, PTFE

  • Conical Shape, with spout
  • Material: PTFE
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
Ref. Nr Capacity ml Height mm O.D. top mm O.D. bottom mm
A 169-01 25 37 38 34
A 169-02 50 41 49 46
A 169-03 100 54 64 60
A 169-04 250 62 97 90


Evaporating Dishes, PTFE

  • Cylindrical Shape, without spout
  • Material: PTFE
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
Ref. Nr Capacity ml Height mm O.D. mm I.D. mm
A 170-01 25 27 43 40
A 170-02 50 25 66 62
A 170-03 100 29 80 75
A 170-04 250 56 100 94


Gasket for cap

Gaskets for caps

  • As septum or gasket for caps
  • one side made of PTFE, one side made of silicone-elastomer for balancing unevennesses on sealing surfaces.
  • Temperature resistance: -200°C to +250°C
  • Chemical resistance: very good
Ref. Nr Diameter mm For Thread Thickness mm
H 973-14 13 GL14 3.3
H 973-18 16.8 GL18 3.3
H 973-25 23.5 GL25 3.3
H 973-32 30.2 GL32 3.3
H 973-41 38 S40 3.3
H 973-45 43.2 GL45 3.3


Gasket for cap

GL Funnels D739-22, PTFE, PPS

Funnels with a capacity of approx. 100 ml made of borosilicate glass. Inlet tube made of PTFE, connection with GL screw caps made of PPS or with ground joint. The outlet tube has a length of approx. 64 mm on the lower side. The glass funnel can be fixed in each position.

Thread of funnel: GL

Ground joint: NS 29/32

Inlet tube (O.D. x I.D.) mm: 20 x 17


Gasket for cap

Parafilm cutting device model LHKS-QT-029

Size: 138 x 138 x 119 mm

Material: plastic

Parafilm cutter for use with parafilm PM-996


Test Tube Holder

Test Tube Holder

12 places test tubes stand in 2 rows

maximal diameter: 22 mm

material : wood


Test Tube Holder

6 places test tubes stand in 1 row

maximal diameter: 25 mm

material : wood


Test Tube Holder

to transport test tubes

material : wood + steel spring


Test Tube Holder

15 sloteed holes

maximal diameter: 13 mm

material : wood


Burette and funnel stand

height: 490 mm

base size: 330 x 110 mm

material : wood + plastic screw


Slide box

ref 1324.2008.01: for 25 slides

ref 1324.2008.02: for 50 slides

ref 1324.2008.03: for 100 slides

material : wood


Bottle Carrier

ref 1350.2008.01: for 2 bottles, 2500 mL

ref 1350.2008.02: for 4 bottles, 1000 mL

ref 1350.2008.03: for 6 bottles, 500 mL

ref 1350.2008.04: for 8 bottles, 250 mL

ref 1350.2008.05: for 8 bottles, 100 mL

material : wood


Contact

Top

Sysmatec
Oberdorfstrasse 51
CH 3930 Eyholz
tel + 41 27 946 80 18
fax + 41 27 946 86 42
info@sysmatec.ch